Well haven't tired anything yet. Does anyone know who sells the springs?
If driving at 50+ the hood on the driverside will lift up like an inch pass the fender.
Well a 245/60/15 is only .5in taller than a 235/60/15 which is currently on the car.
275/50/15 is .3in shorter than what's currently on the car. The 275/60/15 makes it a 28in tire. Or 1.9in taller than is on there now.
Running a 4.10 with a 28in tire puts it at 3693rpm at 70. 26in tire puts it...
Post a picture of yours if you would please. According to nittos site the 555r for 15 is only available as 60.
http://www.cuda-challenger.com/cc/index.php?topic=19470.0
Carl on the thread starter is where I got this information,
One of the guys on another forum says he's running 245/60/15 front and 275/60/15 rear all 4.5" backspace. Says no rubbing no relocation kits no spacers.)
Yeah I just read that. I always thought the aspect ratio was always mm so 60 is 60mm no matter what. But it makes sense that it is 60% which is the ratio part haha.
So 245/60/15s for up front on a 4 1/2" backspace and 275/60/15 on 4 1/2" backspace for the rear fit?
I think im going to get them in 275/60/15 and the coopers in 255/60/15 for the front.
Just makes me sad about no raised white letters =(
So I'm reading 255 won't fit up front without fender work.
245 fits with no work though?
It's only .4in wider.
Shhhhh yes that's the info I got.
The hood isn't even touching the bump stops.
The latch is adjusted low as it will go so the only thing I can think is bring the back of the hinges up which will force the front down.
Well I got it closer but I just read a write up about moving the hinges up to move the back of the hood down and will move the front of the hood down. Will need a second set of hands to attempt.
I just called TTI. Rep said it's just like factory with the offset.
I need to find center ones or had them made.
Edit: just went out and measured. It is offset. 5" towards the center, 2" towards the outside. Boy I'm dumb.
http://www.tuffwheelrestoration.com/exhaust.html
Since they are in my...