Afternoon all, I'm installing my rear sway bar on my 72 Barracuda. It came off of the car so I know it should go back on. I'm having problems bolting the bushings on the long bolt. There is no thread to screw the nut on. If I squeeze the bushings together i can see the threads on the bolt. I'm...
1972 Plymouth Barracuda (Not a Cuda), numbers matching. Reported, one of 400 Barracuda's produced with the Cuda performance options; high performance 340 - heavy duty sport suspension - A/C - p.s./p.b - etc.
Good afternoon all; looking for the correct red paint for the trim on my 72 Barracuda. I tried Totally Auto but I'm getting no response. See attached pic.
Much thanks in advance.
Thank you all for the information. Goes to show you that one really needs to do their homework before spending $$$ on the restoration. So my question is where can I get the correct lead and socket?
thanks Jim, checking my 3 speed wiper motor, it looks like the connector plug is not the type you show in you pic's. Also, the pigtail is not long enough to plug into the bulkhead connector. Suggestions?
Good morning, I'm looking for a 3 speed wiring harness for my 72 340 Barracuda. I can only locate ones for a 2 speed wiper. Any help or suggestions??? Can I modify a 2 speed? Need urgently.
Thanks ahead of time!!!!
Hi all, I'm looking for a good used or NOS a/c liquid line for my 72 340 Barracuda w/air. It's the line that runs from the condenser to the drier on the passenger side, p/n 3502233. The one I received from a Florida firm is not the same configuration as the one I took off and can't find when I...
I want thank everyone for the help. Maybe you all can help me with a bigger problem. My throttle linkage does not line up with the carb. The set up on the top half of the 340 is a Edelbrock Air Gap intake with a Holly carb. I can't use an aftermarket throttle bracket because of the trans. kick...
Can anyone help me find a clip that goes on the end of the carb/transmission rod kick down lever. My car is a 71 Barracuda 340 , 727 transmission, all factory. My parts catalog shows p/n 2946640 b/c crank to carb rod. Any help would be appreciated!!
Tom