Recent content by PPIHCracer

Bottom Row: E44 = Engine – 318, 1-2bbl, 8 cyl, 150hp, G VIN Code, LA Engine Family, Blue Color D34 = Transmission – Torqueflite Automatic JH23 – J = Car Line – Dodge Challenger, H = Price Class – High, 2 = Number of Doors – 2, 3 = Body Style – Hardtop G4B – G = Engine – 318, 4 = Model Year –...

Welcome to the group. We also have a '73 Rallye. Bought it from the original owner in March of '91 who had seen the movie Vanishing Point and decided she was going to move. The SPD is July of '73 but was actually assembled in June. Originally a very basic car (low option), 318, column shift 904...

In the past on Mopars, the alternator provide an issue with the engine running at idle but not with a load. A new dual field alternator had to be installed and one field grounded. Try starting the engine and while it is idling, unplug the voltage regulator to see if the problem goes away. Also...

Thank you. We don't have plans for MCaCN.

Link to the video of our run up Pikes Peak. No windshield wipers, no defroster. No vision at all on the below Glen Cove and yes, I put the front tires off.

Bottom Row: E55 = Engine - 340, 8cyl, 3-2bbl, 290hp, LA, A53 Package D32 = Trans - A727 3-spd Automatic B = Car Line - Barracuda S = Price Class - Special - Cuda 2 = Number of Doors - 2 3 = Roof Style - Hardtop J = Engine - 340, 3-2bbl HP, 8 cyl, LA series 0 = Model Year - 1970 B = Assembly...

You need to contact Ola Nilsson. I know he wrote the book on 71 Cudas but he is a wealth of knowledge and may be able to help with a 70. As I understand it, the first two numbers in the VON, Vehicle Order Number, are the zone code. Knowing this will get you in the region the original dealership...

The clutch operation stuff on our car is factory mechanical linkage, even use the factory plastic bushings clips. It has all been in place since the current engine was installed in 2007. CenterForce Dual Friction clutch and a billit flywheel. ARP hardware everywhere I can use it.

I forgot to mention I use an accusump for insurance. The bottle is mounted to the old console brackets. The car has a custom oil pan which has gates which provide the sump with half the pan's capacity under any g load. I have pulled rod/main bearings from an engine that was ran without the...

Cool car. What brand are the mini-lite style wheels? The reason I ask is I have a set for the Cuda which are 15x8 Superlites from Australia. I couldn't afford the real-deal minilites. They look great on cars like yours and mine, period T/A correct. Wow, you have done a lot of work on your car...

Very cool car. Looks to be Chev powered with those angled injector stacks and mag at the back of the block. Funny how large and yet how small the PPIHC community is. I have traveled a little and people always comment or have a Pikes Peak story to tell. Tell me about your Cuda.

1.12 T/160# leafs. 1.125 front anti and 3/4 rear anti. Ancient non-adjustable Carrera shocks.

You are a lucky person to have grown up here and been able to work this race. We owe a huge "Thank You" to the people who volunteer to work this event. 16 Mile is the end of the W section. My favorite part of the course is from Glen Cove to Devils. Tell me about your '71. My email address is...

The car is nothing fancy, still T-bars and leafs just different springs rates. F/R anti sway bars, 4 wheel disc, small block with w5 heads and a carb, close ratio 4 speed inside Passon aluminum cases, 8 3/4 with 4.30 gears on a Detroit TruTrac carrier to help launch the heavy thing off the...

Thank you all for the kind comments. I drive through Amarillo every time we go back to Ok. to see family. Here is a link to our 2016 run.