• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Xcudame's latest activity

  • Xcudame
    Xcudame reacted to Mr Cuda's post in the thread Rear Sway Bar question with
    Agree
    Agree
    .
    I have your answer, but you are not going to like it. You have a diplomat cop car (F or M body) rear bar. The giveaway was the taper on...
  • Xcudame
    Xcudame reacted to AUSTA's post in the thread A66 Respray with
    Like
    Like
    .
    Painter fixed a few small dents & Scratched changed the black vinyl top was white sprayed black changed to Gator grain all ready for...
  • Xcudame
    Xcudame reacted to Chryco Psycho's post in the thread 500ci plus stroker, 550 hp 440 block with
    Like
    Like
    .
    Might not make more power but it will last longer & with less internal stress , still a win , bet it does make less power ! Shorter...
  • Xcudame
    Xcudame reacted to TIMINATOR's post in the thread 500ci plus stroker, 550 hp 440 block with
    Like
    Like
    .
    Much shorter skirt. Prolly 150 gms. lighter
  • Xcudame
    Xcudame reacted to TIMINATOR's post in the thread 500ci plus stroker, 550 hp 440 block with
    Like
    Like
    .
    Only one change at a time, and dyno it. That's the only way to test. The scientific method! I was just mentioning other things that I...
  • Xcudame
    Xcudame replied to the thread 500ci plus stroker, 550 hp 440 block.
    Funny that Diamond pistons makes a 383 piston to run a stock 440 rod with a stock 383 crankshaft. Don't think they'd bother if there...
  • Xcudame
    Xcudame replied to the thread Biggest Tires???????.
    I have 255/60-15 on the old 15x7 cop wheels on all four corners of my 70 Challenger with no issues. Been on there for about twelve years...
    • IMG_20231125_080049399.jpg
    • IMG_20231125_080009421.jpg
    • IMG_20231125_080024030.jpg
  • Xcudame
    Xcudame replied to the thread INFO needed Keith Black Hemi.
    I think you could run a set of metal o-rings and a msl head gasket and be fine. I'm pinging @Chryco Psycho as he has tons of knowledge.
  • Xcudame
    Xcudame reacted to heminut's post in the thread INFO needed Keith Black Hemi with
    Like
    Like
    .
    That block and the heads shown are cut for wire Orings, a common mod for drag race engines back then. They ran solid copper head gaskets...
  • Xcudame
    Xcudame replied to the thread INFO needed Keith Black Hemi.
    Almost all of the pictures of the bores show notches. I highlighted one so you know. Hopefully some of the Hemi guys will chime in...
    • 20200529_133732 (1).jpg
  • Xcudame
    Xcudame replied to the thread INFO needed Keith Black Hemi.
    Mains - 90 Sides - 80 That's the torque for the main cap bolts in ft-lbs. Obviously the block is notched to allow a stroker crank. Do...
  • Xcudame
    Xcudame reacted to Fordication's post in the thread Interior Paint with
    Like
    Like
    .
    You will find that none of the cars have the same color on the interior from one component to the next. My interior is original and...
  • Xcudame
    Xcudame reacted to Mr Cuda's post in the thread Fm3 paint mix with
    Like
    Like
    .
    As I've said before, the formulas don't matter if you don't have the toners. Every brand has a different strength, and tone. Here is my...
  • Xcudame
    Xcudame reacted to Ronbo73's post in the thread Old Superbird Pics with
    Agree
    Agree
    .
    Awesome, love those cars.
  • Xcudame
    Xcudame reacted to Snowdog's post in the thread Old Superbird Pics with
    Like
    Like
    .
    Here's some old Superbird pics from the 80's or 90's era. They had several superbird owners run their cars around the track at MIS...
Show older items
Back
Top