Search results for query: *

Vacuum test it. If you would use a used one, I have this.

And from out of the blue, the former owner shows up. That is pretty cool.

Cannot be used on a barracuda, and still use the key. Option on a C body though. They bring about $100-125 on C bodies only.

I just wanted to make you aware that the fratzoid has to be removed to apply a new wood grain. I have not done that before, and the pot metal emblem is pressed and peened on the backside. Careful trimming of the spread metal, but leaving a post to apply some JB weld to the back? IDK? Or re-peen...

I have these posted here for sale. FOR SALE - Challenger door panel parts. Wood grain door inserts. Armrest and pull cups.

A car I sold in 1982. I put GA4 on it and a blue interior out of a 71 in it.

Rim Blow, aka the embarrasing horn.

You will need a parts car for your parted out car. And some 71 only parts are not common, like grill.

Alt brackets You can't measure pullies in picture, but those are the ones.

I do. I was going to post them, but thought maybe on FABO?

I have a 340 federal pump, in good condition for sale. No rust or pitting. I was going to detail it, so I pulled it apart. I also wanted to check for date codes on the pulley. There is none. I don't think it was leaking, so you could just do the O ring. Just make sure you press the pulley on...

Nice timing cover. 69 production date. The outside is blasted clean, but not ruined with paint. The inside is solvent washed, not blasted. $110 plus med flat rate usps Need a nice crank bolt? $10 with cover.

1.14 or 1.18? Get whats available. 1.25 is the size of the hex, so that would be max. I had some bar heat treated back when aftermarket bars were not available. It was cheaper to just get the 6160 treated than to mess with finding someone to grind them. They were stiff. Like 80-90mph in a big...

Your issue was answered on b bodies. That is a 73-4. Here's a pic with a 70 on the left, and a 71-2 on the right. 70 base is 3454096

It really is a shame that our parts are so exspensive. I saw them for less, but JEGS has them for $169

Everyone goes crazy for 71's. They made less than 1000. Very few shakers. How much does he want? He's a friend? Offered you at a price already? Less than $75? Pay him.

Headlight assemblies mounted loosely, so they can be centered after grill is installed. Then bumper, and last, valance. I would also pre fit valance with everything off as the mount points might need some tweaking. Hard to do on your back when you can't see, and are reaching in. With...

Here's the 2 styles

Looking good. Huge milestone on the way to done.

I thought the bump was to hold the tip of the gas nozzle in the correct position.