• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Search results for query: *

  1. C

    Ignition won't work and reverse lights are on in park

    Sounds like the wires are crossed at the trans switch , the two outer wires are power in & out for the reverse lights & the center is the ground for the start solinoid
  2. C

    Traffic motor performance issue 440

    You do not want to go lower than 180* , but tuning the carb precisly could help , it may be to rich when hot or a Coolcarb spacer to keep the carb temp down .
  3. C

    New Guy from Virginia

    Welcome , nice to have a 71 Convert !
  4. C

    Engine stalling when in gear.

    Often carb tuning , any carb has a Power Valve circuit but different ways to tune it , if the vacuum drops too low at idle in gear the powervalve will open & add fuel enrichening the fuel mix causing it to stall . You need to get a vacuum reading at idle in gear , the power valve needs to be 2"...
  5. C

    74 Cuda Fuel Line help

    I would use the separator by the fuel pump & connect the return line into the fuel sender on the second nipple
  6. C

    1970 CUDA Restoration - EFI issues & engine validation

    The EFI system makes a Huge difference , Multiport EFI doesn't care about fuel suspension in the air flow so A large throttle body & wide open intake works great as all you are moving is air . A Throttle body injection is completely different the fuel is added into the air flow & travels...
  7. C

    Steering Shaft Moves In and Out

    but the upper shaft should not be able to move vertically
  8. C

    74 Cuda Fuel Line help

    What engine is going in , , I would use 3/8' for any big block or stroker making serious powr .
  9. C

    New guy from San diego

    Welcome to the site !
  10. C

    Stock 340 - Swap 3.23 for 3.91 gears - is Suregrip overkill?

    I would use a sure grip & some sticky tires
  11. C

    Rear Tires Turn When Trans is in Park

    if you have an open diff the tires will turn opposite direction , is the driveshaft turning ?
  12. C

    New guy from North Dakota

    Welcome Lance !
  13. C

    Hello from Florida

    Welcome Bill !
  14. C

    Steering Shaft Moves In and Out

    There is a brg just under the turn signal switch that is retained by a snap ring above & below , this is held down by the retainer for the turn signal switch , one of the snap rings may not be in place, missing or broken
  15. C

    Another from Maryland

    Welcome !
  16. C

    Hello from MD

    Welcome !
  17. C

    Tach reading too high

    Convert it to modern electronics , the company that makes the kit eludes me right now
  18. C

    Any value on a stock 70 440 intake ?

    Definately desirable
  19. C

    Relatively New user, long time mopar owner but general car enthusiast

    Welcome !
  20. C

    Hello from South Florida

    Welcome to the site !
Back
Top