Search results for query: *

Thank you. I’m just a backyard engineer and was thinking that either the Striker Post or Latch Assembly would pull the door in as needed. So yeah if the Post can be adjusted that should be the fix. I will give that a try. Also this door does need to be adjusted back a bit so I will use the door...

Moparleo, Thanks again! Your info is always insightful and welcome. 🌴

Appreciate the info MrCuda. I was working on the door seals when I noticed the door wasn’t aligned. The gaps are pretty good around the doors. I will attempt adjusting the door in using your advice. Regards Rob 🌴

My passenger side door does not align when shut as shown in the attached photo. The door needs to come in about a 1/4 inch. Before I start tinkering can the door latch assemble be loosened with the three Philip screws so it can be adjusted to correct the issue? Or is there another way to adjust it?🌴

Hi Kansas, I’m thinking simply go with the widest front tire that fits with no issues on a stock fish. This size tire should work on the rear as well keeping all four tires the same size in the widest configuration possible. 🌴

No the bar was positioned correctly, but it was a B Body Sway Bar not an E Body. That’s why it appeared odd. I just sourced an E Body Sway Bar so I’m good now. Here is a photo from MrCuda showing the difference. The Orange one is an E Body bar. 🌴

I found and purchased the correct Sway Bar for my Fish. Thanks again for the knowledge & support. Regards Rob🌴

Thanks to Mr Cuda my question has been answered. I have the wrong Sway Bar 🌴

Wow! Great answer Mr. Cuda and the pictures explains it perfectly. Now I gotta remove it and find an E Body Sway Bar. Thank you 🌴

I sourced and installed an old origin rear sway bar in my fish. The Sway Bar is level with the car but the end connector holes do not sit over the axel bracket holes. So the end connector/bushings sit at about a 15-20 degree angle rather than straight up. I attached the frame mounts using the...

Bill had it back to me in a week. I gotta tell you my Unit was really bad after sitting in the old tank since 1985. This guy is amazing! 🌴

I sourced and installed an old origin rear sway bar in my fish. The Sway Bar is level with the car but the end connector holes do not sit over the axel bracket holes. So the end connector/bushings sit at about a 15-20 degree angle rather than straight up. I attached the frame mounts using the...

I have replaced my Fuel Sending Unit twice with inferior reproductions (They Suck). Luckily I kept the original crusty/rusty Unit that looked ready for the dump in my parts pile. I came across “Desert Classic Parts” located in Arizona where they specialize in restoring original sending units. So...

Hey Kansas, I’m with you on the same size widest tire (all four) we can use. I will be following your thread because I want to know as well🌴

I came across this which gives a great overall diagram showing Relays attached to the Fuse Box. I have Relays “A” and “B” but definitely missing the “D” Relay. Again, any photos of the harness connected to the relay would be helpful. Thanks again🌴

Thank you for the Info & the photos. The Relay must be missing because there is not one attached to my Fuse Box as shown in the photos provided by Slotts 👍. I ordered an upgraded Window Relay (100 amp) that is claimed to work and a be better Relay of Fleabay. Hopefully this will work. The photo...

Hi All, my 1970 Barracuda Vert has Power Windows. I can’t find/locate the Relay for the windows. It is possible the relay maybe missing. Can someone explain where the relay is located and provide a photo of a relay where it’s plugged in? 🌴

Congratulations Nice Fish! Man you guys are gonna have fun going through your fish and learning about Mopars 🌴

The Bilstien Shocks give a nice ride. I’m pretty happy with them on my stock 70 Fish 🌴

Great info Charger RTA 😂 (Challenger RTA I couldn’t help it “Humor”) You always provide great Tech info. For those like me who are mentally challenged by electrical issues it’s much appreciated. Your post on Relays simplified their use and function for me. I did source a relay (Not an OEM...