Search results for query: *

No really. I think it's a matter of preface. Big little short or tall some wish they could have them all! Ride height: It's about the launch and how hard or soft you want to land on it.

Don't get me started!Then we all wish we end up like this.

I'm only 10 so I can't comment yet. Give me a minute.

Did you test the lifters. Just off the top of my head. Place the lifter in oil and push on the lifter with a push rod. Testing hydraulic lifters typically involves measuring their leak-down rate to determine if they are functioning correctly. To perform a leak-down test, the lifter is placed...

Yeah but they didn't tell you. They ended up with Z = Zero!

The ground is through the motor mounting nuts in the engine compartment. Switch might be bad. Or as said above connections on switch or heater box bad. Resistor wire in heater box bad, not likely you should at least have high. This is one of the other high current loads that should be feed...

This is my brother's life. At the time of posting this. He is Turkey hunting for week somewhere around Fancy Gap VA.Then one evening and you see this.

Welcome to FEBO. Just got to love the tolls on the PA turnpike. Miss the pot holes? I'll send you some. Here are some reminders.

Welcome to FEBO. Just got to love the Darts of that model.

Welcome to FEBO. Thanks for sharing! NICE!!! Reminds me of a pack of wolfs!

The above info is good. I would still do both if you have a engine lift. so many times been there, done something, knew better, Would of should have could have. Why didn't I just do it in the first place! Next thing you see something else and your cleaning and painting the K frame. Never fails...

Here's the short and long test. To check a Mopar distributor pickup coil, first disconnect the two leads from the ignition module and use a digital multimeter set to ohms (Ω). A functional coil typically measures between 150 and 900 ohms, though some sources specify a range of 200–400 ohms or...

And when the cap was removed it was pointing there?

Number 1 should dead ahead. Static time it.

Yep! Until it hits the firewall. Drain the oil and use a USB camera.

There kind of is. A lot of others have used it for reference. They were not aware if the bumper height measurement. As I was also not aware of it too. Way back when. Keeping in mind everything is good when setting it up. Tires, tire pressure, shocks, size of torsion bar, there could be other...

I have to give ECS Automotive Concepts a plug. I gave them the exhaust manifold numbers. They made the exhaust pipe spot on. Shipped to my door.

Ride height chart Let me give you something. That is if you don't have it. There is no dumb question but the on that was never ask...

26.2" - F70-14 - D78-15 That's about as close as it will get to stock. There are different tire and ride height combinations that are determined by the model. From what I seen. I would say MoparCarGuy answered your question as I understand it too. What chart?

Well no. It would be 2027 when you would file if needed be. If the inflation was factored in what you paid for it and from the time you bought it. Then the maintenance factored in to keep it in the state that it is. I think that would be a fair assessment. You pay 10k 20years ago. What can 10k...