• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Search results for query: *

  1. jackn440

    New Engine, Similar Problem...

    Hey guys, I know I haven't been on for awhile. Just got my computer up and running again so I hope to be on the site a lot more. The car's come quite a ways since my last posts. I now have a '72 413 that I yanked out of a motorhome (yeah, that's right) in the Challenger. It's been in for a...
  2. jackn440

    Charging issue, any ideas?

    Hey guys, been a while since i've been on the site (computer broke this time, instead of the car). A few months back i put a 413 in my 70 challenger...how many e bodies have you seen with those? Runs really good, but i've been having some charging issues. Before you ask, i've replaced the...
  3. jackn440

    Cam Bearings?

    Just pulled the intake and rocker arms. 7 of the lifters were completely caved in on the cam mating surfaces, and #2 exhaust lifter's plunger came out and was sitting in the valley. No bueno.
  4. jackn440

    Cam Bearings?

    Anyone here ever spun a cam bearing? If so, what are the symptoms. Just rebuilt the engine a couple months ago, they were the only bearings I didn't replace. Couple days ago it started losing oil pressure and eventually started making a loud squeaking sound that increased/decreased with idle...
  5. jackn440

    Still having issues...

    Got my new plug wires hooked up, it runs great. Thanks again for all the input fellas.
  6. jackn440

    Still having issues...

    Well I went to check the plugs, and while doing that I noticed that the cylinder 5 plug wire was broken on the spark plug end. I replaced it with one of my old plug wires and problem solved. I'm going to warranty out my MSD plug wires tomorrow for some nice new ones. Once I have those on, I...
  7. jackn440

    Still having issues...

    Thanks for the reminder moper, those things always slip my mind. As far as the fine tuning goes, I've gotten it dialed in, except I'm still experiencing a miss at low rpm that makes itself more noticeable as drive time increases. I rechecked all of my wiring for the electronic ignition...
  8. jackn440

    Still having issues...

    I don't know exactly why it idled so high, maybe had something to do with the vacuum advance (i put alot lighter springs in a while back). But i got my new Mopar Performance distributor and box installed last night, and the idle seems much better. Haven't had a chance to do an overall timing on...
  9. 1970 Challenger

    1970 Challenger

    70 Challenger, 383, 727, 4bbl, headers, custom exhaust, cam, 906 heads, intake work, rebuilt front end, t/a suspension, r/t hood, half restored/half custom interior, 8 3/4" 2:76's, and more bodywork than i'd care to mention. I've had the car for a little over 3 years. I bought it when i was 18...
  10. jackn440

    Still having issues...

    The ballast resistor was actually bypassed completely. I tried hooking one up when i got the car, and it ran like crap. I realized last night that i still technically had a points style distributor, so i went out and splurged on a shiny new set of points and a condenser. I've driven about 100...
  11. jackn440

    what music...

    Pink floyd, baby!
  12. jackn440

    Still having issues...

    Interesting. Thanks for the info. Everything seems to point to the ignition as the source of my problem. I've been wanting to switch over to a Mopar electronic setup anyway, so i picked up a kit on ebay last night. In the meantime i'll just have to try and not drive it too often. I really...
  13. jackn440

    Still having issues...

    The Pertronix was already installed in the engine, which i took out of my 1970 Chrysler Newport a while back. I imagine the owner of that car installed it to replace the points, but i don't know how long ago. I was never really a fan of that setup simply because there was no real external...
  14. jackn440

    Still having issues...

    I believe so. It's a Pertronix Ignitor system, it basically consists of an inductive module in the distributor and the only box is a Mopar electronic voltage regulator. It still has spark right up to when it stalls, but the spark seems to get weaker. Just went through and cleaned all my grounds...
  15. jackn440

    Still having issues...

    My two thoughts this morning were torque converter, or still a loss of spark. Started it up cold and just let it idle in park for about 30 minutes, never putting it in gear. It still died, and wouldn't fire back up again for about 5 minutes. I didn't test the spark but i noticed the coil is...
  16. jackn440

    Still having issues...

    Well i took the intake off, got new gaskets, sealed everything up, took the carb apart and cleaned it while i was at it. Just got back from a test drive, ran great for about the first 15 or 20 minutes, then it started doing the exact same thing again. It starts out as a slight miss at idle, and...
  17. jackn440

    Still having issues...

    Spark is good, nice and blue. I'll reseal that intake tomorrow and see where that gets me. Thanks for the input fellas.
  18. jackn440

    Still having issues...

    For those of you who haven't read my last post, i have a '70 Challenger with a newly rebuilt 383. 4 bbl Carter 650, 727, mild cam, hogged out stock intake, headers, hei distributor (the kind that just runs off of the voltage regulator). At first i was having issues getting it to stay running...
  19. jackn440

    383 stalls when warm, please help

    Thanks for all the advice, guys. I finally got it to stay running. Like burdar suggested, my coil was no bueno. I had a spare flamethrower coil sitting in the shelf, so i threw that on and she hasn't stalled on me yet. The msd coil was still building a lot of head, even mounted way over on the...
  20. jackn440

    383 stalls when warm, please help

    hi, i have a 1970 challenger with a 383. it is not the original engine, and i have had it in the car for almost a year. it ran strong, but was getting some blow by and loss of compression, so i yanked it out and did a re-ring. while i was at it, i added a slightly larger cam, new lifters, new...
Back
Top