Search results for query: *

I use B head bolts with the head cut off to align tranny. When I tried getting that 4 speed in, I could only lift the front on to the bellhousing and that was it. Couldn't lift the back to get it in there. Now my good friend Jack does all the heavy lifting.

I had times when I had to replace a 3 speed tranny. So when my 68 Road Runner 4 speed blew the clutch, out of warranty of course, I knew I could do it myself. Living in Queens NY, and no garage, working on the street dropped the tranny and when it fell on my chest I thought I was going to have a...

On my 74 318 Duster and 71 Hemi Cuda, starter is far enough away from steering box. Although both cars have the Borgeson box, I don't think it is impeded, starter, by the stock PS box.

What engine, and do you know why gasket is leaking? Usually an overheat, or maybe cheap gasket. If you tell us, may help someone else from making same mistake.

The other thing to watch is they only had the shaker with cut out for hood pins. Fortunately my car was original to hood pins so not a problem.

On a 71 Cuda I used a shaker hood from AMD and bought it from Stephens at Carlisle. It fit really nice, but not sure if the weight is the same. I used the springs from the fiberglass hood because it took too much pressure to close it with the original hood springs. I was afraid it would bend the...

I guess original starter cable gets deep sixed. After having it on drivers side for a 100 years, lets put it on passenger side for a change, any advantage?

Did he think it was a 71 thing only? I have my 71 build sheet and no I or O's on it.

I would think the workers wouldn't have access to the O's and I's because they know somebody would incorrectly use them. Could it be workers playing games? Anything is possible, maybe an April 1st Vin.

They don't use O's and I's in Vin's because of the confusion it may cause. They only use 1's and zero's in the vin.

318 & 340 pan doesn't fit a 360.

Get some clay or silly putty and put on the bracket and close hood you'll be able to see where you're coming down on.

I don't know what car were talking about beside an E body, maybe you have the wrong receiver that accepts the latch. The other basic thing is make sure the receiver is open to accept the striker, which is the loop.

I believe 70-72 bumper brackets are the same, 73 & 74 are different.

The foam for the leather seats is different than the stock seats. I may have an upholsterer do it for me.

I have a 71 Cuda with the stock vinyl, and I'm replacing it with the leather because I never liked the look of the stock seats.

Kevin here's tracking # UPS 1Z05V07W0329806431. On one valve cover on the top I bent the stand down so it wouldn't come thru the box. Thanks Tony

Kevin, Ups shipping is $30, so total will be $130. My paypal is [email protected].. Will ship as soon as I get money. Tony

I'll try to get them out Sat. and will send UPS tracking number when I get it. Will let you know cost of shipping also.

You have to give me an address before I can give you shipping cost. And of course a name while your at it.