70 challenger seat parts needed

[rbbruno3]

I need the metal wires that go through the seat covers on a 1970 Challenger. I need only one side they are the same . One of my seats came from a 70 Cuda. I could swap you or buy them out right. (Should be a set of 6 ,2 bottom 4 back)Please let me know what you have this is a picture of the two I need for the bottom (17 ") and there are four on the back of the seat. SE models will not work. Thanks, Rick

 

[Moparparts]

Rick
Your PM box is full, sorry i don't have those currently but thanks for asking
Don

 

[rbbruno3]

Would consider buying a whole seat if I have to


I'm sure I could also make them if I have to go that route

 

[challenger6pak]

Why can't you just get wire and make them?

 

[crocha617]

Why can't you just get wire and make them?

Yes I did this recently. Home Depot sells steel rods in an almost Identical Gauge. I cut them to size and bent the ends of them with vice grips. They are in the same section as the chain and steel plates & angles etc...