'70 Cuda 340 - Fuel Vent Line

[Desert 70 Cuda]

Hello,

Just plumbed all of my fuel lines. I'm working on a non ECS car with 3/8 lines and need someone to verify if this vent looks correct in the trunk or if I've ordered the wrong vent parts. Thank you!

 

[Xcudame]

Looks like the correct parts, but I believe the loop in the truck is protected by the pinch seam of the wheel well like in the photo below.

 

[MoparCarGuy]

The lines do not look like they are bent correctly or you need to push them further into the trunk so those bends angle them toward the wheel tub pinchweld.

View attachment 1970-plymouth-aar-cuda_Right Trunk_Fuel Tank Vent.jpg

 

[Desert 70 Cuda]

Thank you XCUDAME and MoparCarGuy for helping me out, I really do appreciate it! I reworked it and seems like i got it, guess i was just hesitant in over bending it. I also noticed a black clip holding the vent, can you tell me where i can find it or what it looks like?

Thanks again!

 

[MoparCarGuy]

Lots of info from Moparts Connection Magazine's "Comeback Cuda" project but not sure if that wheelwell pinchweld seam clip is mentioned or even available.
I did some preliminary searches but no luck finding it.
Anyone else have info or a source to assist @Desert 70 Cuda?

 

[Desert 70 Cuda]

Lots of info from Moparts Connection Magazine's "Comeback Cuda" project but not sure if that wheelwell pinchweld seam clip is mentioned or even available.
I did some preliminary searches but no luck finding it.
Anyone else have info or a source to assist @Desert 70 Cuda?

Found it! MegaParts has it.

"Trunk Vapor Line Clip" Trunk Vapor Line Clip 1970 Cuda, Vent Line Kits/Grommets, 171-TLVC101 Reproduction, NOS and Used Mopar Muscle Car Parts

Thanks again!