WTB !973 Challenger parts needed

[bamarallye]

I am needing the inserts for the door panels, console plate and wiper motor if anyone has this stuff available.

 

[terrywalker]

Be aware the 73 Challenger had a 2 speed wiper motor as well as a variable speed wiper motor available. You probably want to go with what you have for linkage. The insets and console plate are available as reproductions as far as I know.
T Walker

 

[bamarallye]

Be aware the 73 Challenger had a 2 speed wiper motor as well as a variable speed wiper motor available. You probably want to go with what you have for linkage. The insets and console plate are available as reproductions as far as I know.
T Walker

I haven't seen them listed anywhere yet.

 

[terrywalker]

https://www.classicindustries.com/shop/1971/dodge/challenger/parts/?q=MD4002
New ones for console are available. Used ones are cheaper but usually not as nice.
If you have the door panel inserts and just need the woodgrain see this:
ME1041 - 1970-74 Dodge Challenger; Door Panel Woodgrain Insert Set; RH and LH; Pair

If you need the metal insert, just not the woodgrain material, there's several sets on ebay for sale. Search 1970-74 Challenger door panel woodgrain inserts if no one has them on here. Used bring $160 and up for a pair.
Terry W.

 

[Mr Cuda]

I have these posted here for sale.
FOR SALE - Challenger door panel parts. Wood grain door inserts. Armrest and pull cups.

 

[bamarallye]

I have these posted here for sale.
FOR SALE - Challenger door panel parts. Wood grain door inserts. Armrest and pull cups.

I tried to message you but it wouldn’t let me for some reason. I’ll take the inserts if you will ship to 35811

 

[Mr Cuda]

I just wanted to make you aware that the fratzoid has to be removed to apply a new wood grain. I have not done that before, and the pot metal emblem is pressed and peened on the backside.
Careful trimming of the spread metal, but leaving a post to apply some JB weld to the back? IDK?
Or re-peen the remaining post
Just wanted to inform you.

 

[bamarallye]

I just wanted to make you aware that the fratzoid has to be removed to apply a new wood grain. I have not done that before, and the pot metal emblem is pressed and peened on the backside.
Careful trimming of the spread metal, but leaving a post to apply some JB weld to the back? IDK?
Or re-peen the remaining post
Just wanted to inform you.

View attachment 144242

I'll figure something out

 

[sixpactogo]

I have this Auto console plate. A couple small pits in the chrome and needs a new woodgrain applique.
PM me if interested

 

[terrywalker]

See, parts you need are being listed by the owners on here. Just let them know whether you need a 2 speed or a variable speed wiper motor now and they can set you up.
Terry W.