340challconvert
Well-Known Member
Comp Cam high performance Valve Springs For Sale 901-16
The Comp Cams 901-16 is a set of 16 single outer valve springs with a 1.494" OD, featuring a 1.080" ID, 330 lbs./in rate, 105 lbs seat pressure at 1.650" height, and a 1.100" coil bind height, designed for around 0.490" max lift, often used with hydraulic flat tappet cams.
I was going to use on my 340 heads rebuild
The machine shop purchased springs for my heads so i am selling these
(These springs are slightly larger then the stock springs and do not use the factory spring cap)
Specs:
Purchased from Summit- current price $88.95
Will sell for $65.00 plus shipping from Parsippany, NJ 07054
The Comp Cams 901-16 is a set of 16 single outer valve springs with a 1.494" OD, featuring a 1.080" ID, 330 lbs./in rate, 105 lbs seat pressure at 1.650" height, and a 1.100" coil bind height, designed for around 0.490" max lift, often used with hydraulic flat tappet cams.
I was going to use on my 340 heads rebuild
The machine shop purchased springs for my heads so i am selling these
(These springs are slightly larger then the stock springs and do not use the factory spring cap)
Specs:
- Type: Single Outer Spring with Damper
- Quantity: Set of 16
- Outer Diameter (OD): 1.494"
- Inner Diameter (ID): 1.080"
- Spring Rate: 330 lbs./in. (some sources say 353 lbs./in., but 330 is more common)
- Installed Height: 1.650"
- Seat Pressure (at 1.650"): 105 lbs.
- Open Pressure (at 1.250"): Approx. 242 lbs. (at 1.250")
- Coil Bind Height: 1.100"
- Maximum Valve Lift: ~0.490"
- Recommended Use: Hydraulic flat tappet camshafts, providing stability for higher RPMs
Purchased from Summit- current price $88.95
Will sell for $65.00 plus shipping from Parsippany, NJ 07054
Last edited:
