Ebay - Air Gap for 340

[Titan1969]

I am looking to upgrade to AirGap intake during my cam swap, I found several on Ebay. They seem inexpensive so Im hesitant to purchase. Any feedback on these Ebay intakes? I see they are made in China so I understand I may need to clean up edges , holes prior to install.

https://www.ebay.com/itm/4066532176...lp:2332490&itmmeta=01KYDC19FF71NFK6348J593B9M

 

[pschlosser]

if you have reason to deviate from factory setup and oem parts, many like the dual plane edelbrock.
I've never heard of this AirGap. Others may chime in, but if not, it seems like a crap shoot.

 

[Chryco Psycho]

I have never used one of these , I have used the Eddy RPM , Eddys use a soft alum & are made in China & have poor port alignment , not high Quality so possibly this is actually made from better material or at least equal , could be the casting is more accurate also .
If your heads have not been milled down this should not be hard to fit .
Probably worth the gamble for the price , IMO