7DCUDA383A
Well-Known Member
What do y'all use to clean the engine bay from leaking power steering fluid etc.
Engine cleaner or degreaser
- Thread starter 7DCUDA383A
- Start date
340sport
Active Member
- Joined
- May 8, 2020
- Messages
- 44
- Reaction score
- 11
On the painted inner fender or on the K frame?
7DCUDA383A
Well-Known Member
K frame mostly
Snakedoctor
Well-Known Member
(Following) Always open to new ideas if they seem logical.
Easy-Off oven cleaner works well, keep off the aluminum parts, Rinse thoroughly.
340sport
Active Member
- Joined
- May 8, 2020
- Messages
- 44
- Reaction score
- 11
On a K frame, easy off works.
Castrol super clean works and can be diluted.
Brake cleaner but could be harsh.
Take your pick. I would suggest the least aggressive. No need to use a solvent if something that's easily diluted and rinsed with water works.
If it's built up and caked, I would wipe off after spraying Super Clean or purple power. Scrub with nylon brush if needed. Move to something stronger if necessary.
Castrol super clean works and can be diluted.
Brake cleaner but could be harsh.
Take your pick. I would suggest the least aggressive. No need to use a solvent if something that's easily diluted and rinsed with water works.
If it's built up and caked, I would wipe off after spraying Super Clean or purple power. Scrub with nylon brush if needed. Move to something stronger if necessary.
7DCUDA383A
Well-Known Member
Anyone use warm water and Dawn .
340sport
Active Member
- Joined
- May 8, 2020
- Messages
- 44
- Reaction score
- 11
That's probably a good place to start. I don't have access to warm water in my shop but I'd give it a shot.
mopar jack
Well-Known Member
I use Gunk engine cleaner on the engine and K member and 409 on the engine compartment painted surfaces. Then I use a garden hose to wash it away.
7DCUDA383A
Well-Known Member
I did see the Gunk , thanks Jack.
TBrashears
Member
Powdered laundry detergent or dawn.
Challenger RTA
Well-Known Member
Depends how bad it is. I have used gasoline in a few circumstance. Kerosene to remove heavy grease and oil. Next Gunk to de grease. Kerosene and Gunk are about the same thing. Followed by a cleaner such as purple power or simple green. The to remove any residue of any sort dish soap and water. I have also used a window cleaner for a very mild cleaning. Start with a cleaner that you think matches you needs.
Take note! When cleaning, clean from the bottom up to prevent streaking. Also keep a little wet or just damp to keep any stain from setting in. Then wipe from top to bottom.
Take note! When cleaning, clean from the bottom up to prevent streaking. Also keep a little wet or just damp to keep any stain from setting in. Then wipe from top to bottom.
7DCUDA383A
Well-Known Member
What's up RTA , just the power steering fluid when it went out , it traveled a good ways .
Challenger RTA
Well-Known Member
7DCUDA383A
Well-Known Member
Do you know if I can use a brass plug for the pushrod hole , the plug that came out had some bad threads .
I didn't believe it until I tried it, but...Dawn foaming detergent works like a champ. It's bio-degradable and scrubs great. My Brother in law tuned me up on this. I laughed at first but now I am a believer.
TBrashears
Member
Brass is fine,I always use a little thread sealer paste.
7DCUDA383A
Well-Known Member
I cant find a black steel sunk plug and I didnt want aluminum , so brass is OK.
Yep all the time on lots of items! If you have not used this. Keep spending your hard earned cash on other cleaners.
PLY478
Challenger RTA
Well-Known Member
It's not worth it! When the wife finds out you took it the price is much higher! Ask me how I know! What's yours is theirs and what theirs is theirs.
Last edited:
Similar threads
- Locked
