Engine wiring harness help

[74340]

I'm looking for an engine wiring harness for my 74 Challenger the original ones getting pretty crispy... I ordered one from classic industries but ended up being the wrong one my 74 Challenger was produced in 1973 of October currently has 340 in the car but originally had a 318... I purchased a classic industries engine wiring harness but it ended up being the wrong one the pins were the wrong number for the connector... I was wondering if anyone had an engine wiring harness that would work for me or where I could perhaps buy one... This is a current picture of the connector of the wiring harness currently on my car

 

[Ricks72Chlgr440]

You might want to contact Year One. There are two harnesses for the 1974 year depending on the build date (before Oct 12 and after Oct 12). If in doubt, call them to see if you can get a picture of the bulkhead connector to be sure it is the one you want.

E-Body 1970-74 - Barracuda - Challenger -- Electrical / Harnesses / Engine Harnesses /

 

[74340]

Yeah that's what happened to me the one I ordered was for a 74 Challenger however apparently there's two different kinds for that model in year figures I got the wrong one

 

[EW1BH27]

If you can't exchange it at Year One give Bill Evans a call. Since your build date is in October be VERY specific with which on you need. Perhaps go as far as tell him what pin configuration you currently have with your car. He makes them himself, I have his engine, headlight & transmission harnesses on my car.

EvansWiring.com : Product Catalog

Evans Wiring Harnesses, Mopar Wiring Only

www.evanswiring.com

 

[74340]

If you can't exchange it at Year One give Bill Evans a call. Since your build date is in October be VERY specific with which on you need. Perhaps go as far as tell him what pin configuration you currently have with your car. He makes them himself, I have his engine, headlight & transmission harnesses on my car.

http://[URL]http://www.evanswiring.com/catalog.htm

[/URL]
View attachment 110775

I am calling them tomorrow thanks

 

[Xcudame]

I second with EW1BH27, contact Bill Evans. Explain your situation to him. Bill will make you the correct harness if need be. And he's a really nice guy to talk to!

 

[Mopar Nut]

If you bought your wiring harness from Classic Industries, it was probably made by M&H. Yearone (M&H) sells their harnesses to Classic Industries.

Call M&H if it is.

 

[brotow]

I have an original from a 74 if you want me to take some pics, let me know.

 

[74340]

I have an original from a 74 if you want me to take some pics, let me know.

 

[74340]

I am interested could you please send me pictures?