• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

ESPO + 2

AUSTA

Well-Known Member
Joined
Apr 16, 2015
Messages
937
Reaction score
501
Location
PERTH WA
Anyone have a pic of a 340 challenger with espo 6 leaf plus 2" lift
Need to raise the rear not sure on + 1 or + 2
 

Adam

Well-Known Member
Joined
Dec 25, 2012
Messages
1,648
Reaction score
707
Location
Washington
In my opinion Challengers sit low in the back. I have Espo +1 and like the look very much; looks like stock should look, to me. +2 would also look good for a hot rod look, or resto-mod car with big tires. Just my 2 cents.
 

AUSTA

Well-Known Member
Joined
Apr 16, 2015
Messages
937
Reaction score
501
Location
PERTH WA
In my opinion Challengers sit low in the back. I have Espo +1 and like the look very much; looks like stock should look, to me. +2 would also look good for a hot rod look, or resto-mod car with big tires. Just my 2 cents.
Thanks adam,
Ordered a set of + 2
Tried a set of new mopar springs re-arced to +2 and was good for about 1 month then dropped back close to the old setting waste of time.
 

lastcuda

Active Member
Joined
Mar 26, 2015
Messages
43
Reaction score
9
Location
Western North Carolina
I ran air shocks on my Cuda after the first couple of years from new. The Cudas seemed to sit too low also. When I started restoring, I put heavy duty springs on that the Hemi cars used. It's a little stiffer ride but sits at a good height and feels fine to me.
 
Back
Top