fusible link

[Ralph]

Can you tell me where the fusible link is on a 73 340 cuda. I am a B body guy up until now and on the B bodies its right there on the firewall.

On my e body I cannot see it

Please advise where to look or photo please

Thanks for all the help this is a great website

Ralph

 

[Chryco Psycho]

just by the start relay on the inner fender near the battery usually has a blue tag molded on it

 

[Ralph]

just by the start relay on the inner fender near the battery usually has a blue tag molded on it

Is it removable or is it part of the wiring and a new one would need to be cut in ?

Thanks Ralph

 

[Chryco Psycho]

I forget if the 73 has a plug on the end , later years did so it was easy to replace

 

[Adrian Worman]

I think you're right, 72 has a moulded wire but 73 on has a serviceable type

 

[74chlngrTT5.9]

The 74 challenger one is connected to starter relay on the drivers fender with a bullet connector on the other end.
6 to 8 inches long.
I would assume they are the same.
And yes as noted above it has a molded on rectangle tag on it.

 

[Ralph]

The 74 challenger one is connected to starter relay on the drivers fender with a bullet connector on the other end.
6 to 8 inches long.
I would assume they are the same.
And yes as noted above it has a molded on rectangle tag on it.

thanks to all