WTB Looking for a drive shaft

[Ryan-148]

Recently purchased a 1970 Dodge Challenger deputy sadly it didn't come with a drive shaft
And I was curious if anyone had a drive shaft for sale even if it needs rebuilt transmission is an a230 with a 7 and 1/4 rear end so I believe it's a 23 spline

 

[Arlo Price]

I'm not a driveshaft expert but I can copy numbers.....The listed length is 52.03 inches for a 70 Challenger slant six with A/T. That is center to center on u-joints. The diameter is listed as 3.25 w/7.25 axle

No listing for a manual trans, slant six 70 Challenger

68 & 69 Coronets & Charger w/8 3/4, 318 or 383-2 also used 52.03 length 2.75" diameter w/8.75 rear

67 All B bodies with M/T & 8.75 rear & 383 used a 52.03" x 3.25"

All of the above used a 7260 u-joint.

Hope this info helps as it appears as though you have a nice Challenger.

P.S. If it ain't locked up, That leanin' tower of power will probably run no matter how long it's been sitting.