Rallye wheels and trim rings.

[cuda722]

How can you tell an original rallye wheel trim ring from all the repops? I have a set of rally wheel that were on my 1972 cuda when I bought it. Each wheel has a pentastar stamped on it, but the trim rings have nothing.

 

[EV2RTSE]

Assuming you have 14" rallyes, the trim ring should look like this.

 

[cuda722]

Assuming you have 14" rallyes, the trim ring should look like this.

They are 15 by 6.5 wheels.

 

[challenger6pak]

They will fit tight to the wheel edge The reproductions are for the 15X7 and have a gap due to the 1/2 inch space difference.

 

[EV2RTSE]

Here is a set of original 15 x 6.5" trim rings.
http://www.ebay.com/itm/Mopar-Rally...ger-/151737670201?hash=item2354451a39&vxp=mtr

There are no markings or part numbers stamped in trim rings, but some originally had a decal with the part number though. Original 15 x 7 trim rings would be 3" inches deep, 15 x 6.5 are 2.75" deep.

 

[challenger6pak]

The 15X7 ring will leave a gap between the ring and the wheel lip.

 

[cuda722]

I think I might have a set of original 15 by 6.5 wheels and trim rings.

 

[cuda722]

These are some pics I just took to get an opinion?

 

[challenger6pak]

They look correct. They were on Cordobas, 75-79 Chargers and a few other cars.

 

[cuda722]

They look correct. They were on Cordobas, 75-79 Chargers and a few other cars.

I had seen the trim rings on ebay. My question is still how can you just say they are original by looking at a pic on the web??

 

[challenger6pak]

I know of no reproduction trim rings for the 14X6.5 wheels.