Rusty rear window channel

[cudanutjim]

I have rust on my rear window channel on my 1970 cuda on the lower corners. Does anyone know if anyone makes weld on pieces like are sold for B-bodies just for the lower corners?

 

[Challenger RTA]

Post a picture of your issue. Others may have encountered it. Is it part of the dutchman panel or roof or both? You just might have to hammer out a piece for it.

 

[Sal C]

Common area for rot, rain water pools there. Not that difficult to fix, make your own out of sheet metal and weld in place...

 

[MILOJ]

That is the best way a little time and you can make a copy I have learned to do that even for my firewall plate measure good and cut out like the old one

 

[MMoparDan]

The repair channels are not that hard to make. Here's a picture of a test panel I made with my new shrinker/stretcher. I took a piece of scrap, bent it and tried it out