shaker hood set up

[bert]

I have a 1973 cuda 340 with factory air, will the shaker base plate fit or will I need to change the compressor?

 

[pschlosser]

The base plate may need to be notched in the front to accommodate the compressor. I've read of others going with a smaller compressor (Sanden SD508).

 

[bert]

The base plate may need to be notched in the front to accommodate the compressor. I've read of others going with a smaller compressor (Sanden SD508).

Thanks for the info

 

[6PKRTSE]

The smaller Sanden compressor would help. I know it is a different car and not a Shaker, but I have had a Sixpack set up on my 70 Charger R/T S.E. with A/C for the last 37 years that I had to notch the base.

 

[bert]

The smaller Sanden compressor would help. I know it is a different car and not a Shaker, but I have had a Sixpack set up on my 70 Charger R/T S.E. with A/C for the last 37 years that I had to notch the base.

View attachment 144783

View attachment 144784

Thanks, I'll look into the smaller compressor

 

[Avalanche]

If your using an electric fuel pump, you can install the sandan compressor in the manual fuel pump spot.