under body.

[michael bucklew]

this is the front wheel well --back side---if i recall there was a heavy coat of underbody or similar material on this area. i used truck bed liner in the rear wheel wells. and used siliconized rubber as an under body in other areas. the front fenders still have the factory coating inside---no wheel wells on car. came that way----left inner coating in place. there are two holes as seen, does any one know what goes here????

 

[Chryco Psycho]

I can't think of anything on the passenger side that goes there .

 

[michael bucklew]

I can't think of anything on the passenger side that goes there .

thanks

 

[moparlee]

Those two holes are for the plastic pins that hold the firewall insulation pieces in place. There are several of those holes along the firewall.

 

[michael bucklew]

Those two holes are for the plastic pins that hold the firewall insulation pieces in place. There are several of those holes along the firewall.

ok-- that explains all the extra holes----used dymamat up as far as i could place it.