Vinyl top stainless trim hole clips on '71 Challenger

[LASTFC7]

Hey, everyone! My '71 Challenger is an original plum crazy car with a white vinyl top. Sometime in the early '90's it was painted hemi orange and the top as removed. The owner painted the roof black after welding up the stainless trim holes. Fortunately, I was able to barely make out the outline of the original holes after grinding the paint/primer away. I backed up what I'd found from another post on here about the correct hole placement/measurements, and they were spot on with the "faint circles" I found. Long story short, does anyone have a picture of what the stainless trim clips look like? From what I have found, the car was built on one of the last days of production before the '72 models rolled out, so it's going back original. (383/727 console, white side stripe, blk/whi houndstooth bucket interior)

Thanks!

Andy

 

[moparlee]

Hey, everyone! My '71 Challenger is an original plum crazy car with a white vinyl top. Sometime in the early '90's it was painted hemi orange and the top as removed. The owner painted the roof black after welding up the stainless trim holes. Fortunately, I was able to barely make out the outline of the original holes after grinding the paint/primer away. I backed up what I'd found from another post on here about the correct hole placement/measurements, and they were spot on with the "faint circles" I found. Long story short, does anyone have a picture of what the stainless trim clips look like? From what I have found, the car was built on one of the last days of production before the '72 models rolled out, so it's going back original. (383/727 console, white side stripe, blk/whi houndstooth bucket interior)

Thanks!

Andy

Here you go.
1000098 VINYL TOP TRIM CLIPS 71/74 E-BODY, BODY, 1000098 :Mopar Fasteners, Clips & Hardware

 

[LASTFC7]

Here you go.
1000098 VINYL TOP TRIM CLIPS 71/74 E-BODY, BODY, 1000098 :Mopar Fasteners, Clips & Hardware

Thanks! For these clips, it looks like they are the kind that slide onto the studs?

 

[pschlosser]

If the studs are long-gone, you may have to use the 1970 variety.

 

[LASTFC7]

If the studs are long-gone, you may have to use the 1970 variety.

They are...looks like this is what I'll be doing. Thanks for the reply!