• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Latest activity

What's new Featured content New posts New Member Garages New garage comments New profile posts Latest activity
  • Xcudame
    Xcudame reacted to Vaanth's post in the thread brake clips with
    Agree
    Agree
    .
    The parts you describe are the positioners, not the anti-rattle springs (clips). The positioners retain the caliper guide pin, or...
  • Xcudame
    Xcudame reacted to moparleo's post in the thread 1973 cuda measurements needed with
    Agree
    Agree
    .
    The closest thing to the radiator will be the water pump snout if you don't install a belt driven fan. Accessories don't matter unless...
  • Xcudame
    Xcudame replied to the thread Hello from Montana.
    That makes it much simpler! Stock 383s sure rev up fast! But if the internals need a lot of work, the 431 stroker (440 crankshaft and...
  • Xcudame
    Xcudame reacted to janko's post in the thread Hello from Montana with
    Like
    Like
    .
    A 383 came with the car and it has a 8 3/4 rear.
  • Xcudame
    Xcudame reacted to HPP's post in the thread How much can I get out of a 318. with
    Like
    Like
    .
    Don't overlook the chassis and safety requirements for running 10s. Per NHRA 10.99 seconds (6.99 1/8th) or Super Street SFI 4.1...
  • C
    Chryco Psycho replied to the thread Vacuum advance.
    I do the same on street engines .16*-18* initial with a short curve & no vacuum advance
  • Challenger RTA
    Challenger RTA reacted to MILOJ's post in the thread Rusty rear window channel with
    Agree
    Agree
    .
    That is the best way a little time and you can make a copy I have learned to do that even for my firewall plate measure good and cut out...
  • Challenger RTA
    Challenger RTA reacted to MMoparDan's post in the thread Rusty rear window channel with
    Like
    Like
    .
    The repair channels are not that hard to make. Here's a picture of a test panel I made with my new shrinker/stretcher. I took a piece...
  • Mopar Sal
    Mopar Sal replied to the thread FOR SALE 72-74. CHALLENGER. TAIL. LIGHTS.
    Hi, do you still need the two lenses, $100 shipped I have PayPal Sal
  • moparleo
    moparleo replied to the thread 1973 cuda measurements needed.
    The closest thing to the radiator will be the water pump snout if you don't install a belt driven fan. Accessories don't matter unless...
  • moparleo
    moparleo reacted to Xcudame's post in the thread 1973 cuda measurements needed with
    Agree
    Agree
    .
    That's kind of an awkward question. It varies to some degree depending on accessories especially air conditioning. The main thing is to...
  • S
    Steve340 reacted to strycker's post in the thread brake clips with
    Thanks!
    Thanks!
    .
    Vaanth steve= Thank you for your time and knowledge Greatly appreciate your time
  • strycker
    strycker replied to the thread brake clips.
    Vaanth steve= Thank you for your time and knowledge Greatly appreciate your time
  • Katfish
    Katfish reacted to Vaanth's post in the thread brake clips with
    Agree
    Agree
    .
    The parts you describe are the positioners, not the anti-rattle springs (clips). The positioners retain the caliper guide pin, or...
  • S
    Steve340 reacted to Vaanth's post in the thread brake clips with
    Like
    Like
    .
    The parts you describe are the positioners, not the anti-rattle springs (clips). The positioners retain the caliper guide pin, or...
Show older items
Back
Top