FOR SALE 1970-74 Dodge Challenger and Plymouth Barracuda parts for sale

[6packbee]

Hello and thanks for the invite. I am a new member and I have just purchased a collection of boned out 1970-74 Challenger and Barracuda parts. The gentleman I bought these parts stripped them from 30 Challenger and Barracudas way back between 1980-1990. Most are Challenger parts. There are doors, hoods, deck lids, exterior and interior trim, bumpers, hood hinges, hood latch release assembly’s, grilles, taillights, A/C boxes, A/C compressors, K frames, disc brake, drum brake, gauge packages, dash assembly’s, visors, door panels, rear springs, starters, alternators, intake and exhaust manifolds, much more. Please respond with your needs. Thank you

 

[svast35th]

Can you specify what you have for a 1970 Challenger? I have a roller project so I'm in need of quite a few parts (interior, trim, powertrain, etc.).

Do you have the R/T hood? Any Dashboards? V8 k-frame?

 

[Cuda Hunter]

I would be interested in any broadcast sheets, fender tags, vin tags, inspection tags, factory documentations, monroney reports, order forms. Anything documentation.

However, I am specifically looking for M46 scoops for 1970 BH barracuda's only.
If you are unfamiliar, click here M46 scoops wanted
Click here, M46 Scoop Details
And if you want more, here is my small and meager registry, click here, The M46 List

If any of your parts have original paint or stripes from an M46 car I would like to entertain the purchase of the parts.

I'm also looking for multiple 70 challenger parts, December dated car.

I see you are in Logan Utah. That is close enough for me to come take a look and see what all parts I could purchase. I'll pm you.
@6packbee

 

[6packbee]

I would be interested in any broadcast sheets, fender tags, vin tags, inspection tags, factory documentations, monroney reports, order forms. Anything documentation.

However, I am specifically looking for M46 scoops for 1970 BH barracuda's only.
If you are unfamiliar, click here M46 scoops wanted
Click here, M46 Scoop Details
And if you want more, here is my small and meager registry, click here, The M46 List

If any of your parts have original paint or stripes from an M46 car I would like to entertain the purchase of the parts.

I'm also looking for multiple 70 challenger parts, December dated car.

I see you are in Logan Utah. That is close enough for me to come take a look and see what all parts I could purchase. I'll pm you.
@6packbee

 

[6packbee]

Cuda Hunter,
I am in town for a couple weeks so you could come by about anytime. Sorry no M46 scoops. That’s a rare one. Can’t say that I have ever seen any. I have a couple build sheets, but they are for B bodies.
Thanks for your interest,
Neil Anderson

 

[Cuda_mark]

@6packbee Do you have any original date coded headlights for a 70 Cuda?

 

[6packbee]

I have a lot of headlights. Not many for Cuda. What date were you looking for? Thanks

 

[Cuda_mark]

I have a lot of headlights. Not many for Cuda. What date were you looking for? Thanks

Any dates that would be OK for a 70 Cuda ...doesn't need to be for a specific build date but I want originals with the correct fluting. So just anything that would have originally come in a 70 Cuda.
They will look like this:

 

[6packbee]

@6packbee Do you have any original date coded headlights for a 70 Cuda?

I will check. Any particular date you need? Thanks

 

[Ls1slow]

PM sent but looking for some 2 piece brake rotors and some original hardware from a starter

 

[svast35th]

Can you specify what you have for a 1970 Challenger? I have a roller project so I'm in need of quite a few parts (interior, trim, powertrain, etc.).

Do you have the R/T hood? Any Dashboards? V8 k-frame?

@6packbee let me know if you have anything please

 

[6packbee]

@6packbee let me know if you have anything please

I have an R/T hood, buckets, rear seat, k frame, many interior and exterior pieces, I have a 70 HP block, 440 sixpack rods, pistons. Many many more Challenger parts.

 

[1moretoy]

Any rallye gauges? I'm looking to convert my non Rallye. I don't actually need the gauges, just the housing. I'm going with dakota digital.

 

[6packbee]

Any rallye gauges? I'm looking to convert my non Rallye. I don't actually need the gauges, just the housing. I'm going with dakota digital.

Sorry, no rallye guages.

 

[6packbee]

Any dates that would be OK for a 70 Cuda ...doesn't need to be for a specific build date but I want originals with the correct fluting. So just anything that would have originally come in a 70 Cuda.
They will look like this:View attachment 142091

I could only find 2 of them. 1 GE and 1 Sylvania. I tested them, both work hi and low beam. No info on the back of either.

 

[svast35th]

I have an R/T hood, buckets, rear seat, k frame, many interior and exterior pieces, I have a 70 HP block, 440 sixpack rods, pistons. Many many more Challenger parts.

@6packbee

I have an R/T hood, buckets, rear seat, k frame, many interior and exterior pieces, I have a 70 HP block, 440 sixpack rods, pistons. Many many more Challenger parts.

What would be the price for each item?

 

[gran coupe john]

Do you have front disc brakes for a 71 barracuda?

 

[6packbee]

Do you have front disc brakes for a 71 barracuda?

I will check.

 

[6packbee]

Do you have front disc brakes for a 71 barracuda?

I will check.

 

[6packbee]

@6packbee

What would be the price for

@6packbee

What would be the price for each item?

@6packbee

What would be the price for each item?

RT hood 600
Bucket seats 400 ea.
440 HP block 700
Thes items would have to be picked up at my location.