6 pack intake differences

[B5blueGC]

Is there a difference in size between the 340 and 440 6 pack intake air cleaners? I can’t find any info on that.

 

[Chryco Psycho]

Basically no But yes ! They all used the same filter .
Any will fit the carbs as the spacing is the same but there were different designs - the 340 / TA base was unique to fit the fiberglass hood , 440 with ralley or Cuda hood had a blocking plate around the front of the air cleaner bases , the 69 1/2 440 was a different base to seal to that hood & the shaker hood used a different base also .

 

[Xcudame]

See photos below for more reading enjoyment on 6 pack air cleaners.

 

[B5blueGC]

Thanks for the detailed information.

 

[Cuda416]

What reference is that?! I want one!

 

[6PKRTSE]

As mentioned above. I have a couple 440 Sixpack set ups, a 383 (short deck) Sixpack and a 340 Sixpack set up. All will take the same carbs, spacing is all the same and the aircleaner assemblies are all interchangeable. However, there are several different designs of aircleaner assemblies.

 

[Cuda416]

Sorry, I'm talking about the book in post #3

 

[floyd]

E-body Fastener Guide from MMC. Costs a bit but an invaluable resource.

E Body (Challenger and Barracuda) 1970-74 Manual. Guide to Fasteners, Hardware and General Assembly (ERMX) - MMC DETROIT, LLC

 

[Xcudame]

Sorry, be out of FEBO for a little while. Thanks Floyd for supplying the link. MCC reference material really is worth the expense!

 

[B5blueGC]

E-body Fastener Guide from MMC. Costs a bit but an invaluable resource.

E Body (Challenger and Barracuda) 1970-74 Manual. Guide to Fasteners, Hardware and General Assembly (ERMX) - MMC DETROIT, LLC

Thanks for the link. I ordered a set.

 

[mopar jack]

Nicks garage has a good air cleaner reference. Nick's Garage - Air Cleaner Identification

 

[B5blueGC]

I ordered that manual but it does not have the sections pictured. Is there a different one?

Thanks for the link. I ordered a set.