73 Challenger Resto, Japan

[Kuruton]

After a base coat of primer, more seam sealer applied, then more primer

 

[Kuruton]

Then came a couple light color coats

 

[Kuruton]

A lot of the bondo and body work had already taken place ahead of this, but to group it all in one area, I'm going to throw it here. As I post this, He is currently still in bondo + initial primer layer +second bondo pass stage on most of the rest of the car. Hoping to have paint finished by end of fall minus the engine bay. I'll pull the engine at that point, take it to a shop to me machined and checked, then do a cam and a few other upgrades. Looking to get around a streetable 450hp with good vacuum and good torque. So please chime in if anyone has good recommendations.

 

[Kuruton]

 

[Kuruton]

 

[Kuruton]

 

[Kuruton]

 

[Kuruton]

That's where we're at as of today. Been doing lots in the background repairing and replacing all of the interior while he's doing the body work too. Will probably upload the interior stuff once he's done with the body and I can start putting stuff back into the car.

 

[moparlee]

That's where we're at as of today. Been doing lots in the background repairing and replacing all of the interior while he's doing the body work too. Will probably upload the interior stuff once he's done with the body and I can start putting stuff back into the car.

Nice work! That's great that you can work along side him in his shop.