moparleo's latest activity
-
Very nice indeed! Got to love the Thermoquad. Especially when the rear secondaries snap open! You can hear the air rushing in as the car... -
Success! Happy cruising.
-
Looking good!
-
Rebuilt the thermoquad yesterday morning, slapped it on the newly rebuilt engine in the afternoon and started it up. Sounded great...
-
With 15" you can get some wide white walls which look pretty cool to me...
-
moparleo replied to the thread Seat Latch Wear.Latches were not meant to be disassembled. Just lubricated. Can be removed and soaked in a cleaner. Look up a video on youtube fore...
-
moparleo replied to the thread Windage tray torque?.FSM always...
-
moparleo replied to the thread Seat Latch Wear.Kidding, right ? The latch must engage the loop bracket. The bracket is made of a softer material. When the latch parts need service...
-
Yes, that would not be good. I took a look at the latch mechanism this afternoon. It looks like the jaws are wide open. Pressing the...
-
My thought is that they are sticking from years of dirt etc and not being used. They may need to be cleaned and greased. If the latches...
-
The pictured trim rings, with the part number 3461043 on the label, are not 1970 original rings. These are the later re-issue and are...
-
moparleo replied to the thread Seat Latch Wear.Pictures make questions and answers so much easier. And info more than my Challenger" Year ? The bucket seat backs on all of those...
-
moparleo replied to the thread SOLD 70 Challenger AC Dash Pad.Shipped a core last year from Orange County to Arizona, made my own container for foam and cardboard . Because of oversized dimensions...
-
moparleo replied to the thread 16" or 17" Rally Wheels.I had several sets made for me in the 70's 80's using 15" GM outers. In those days those stamped steel wheels were almost just scrap...
-
moparleo replied to the thread 16" or 17" Rally Wheels.The factory Rally wheels, regardless of rim size, 14" or 15" no other options use the "exact same wheel center." It was either mated to...