Xcudame's latest activity
-
46 years between photos -
Xcudame replied to the thread correct valve cover bolts 383 cuda.They look like the 8 valve cover bolts (screws) in the middle of the valve covers. Also the oil pan bolts are the same size and most...
-
Xcudame replied to the thread Shoulder Belts.On the 70 and E-Bodies there is a lap belt and shoulder belt that buckled separately and they were colored to match the interior until...
-
Xcudame replied to the thread correct valve cover bolts 383 cuda.@cuda joe did you mean to attach a picture?
-
Xcudame replied to the thread C body axle.Like I've said, I learn something new every time I log into this site. Regarding the small vs large yoke, the following Moog adapter...
-
The 1967 New Yorker 8-3/4" axle, like other 1965 - 1969 C-bodies, except 1969 station wagons, has a 46" perch to perch center dimension...
-
I'm not coming to Canaduh just for free beer!
-
I like to do it every once in a while to look at it and check out whats been done and plan the next stages out, seems to help smooth out...
-
NOW I know why you have that Cuda sitting so high up in the air!:rofl:
-
Post a picture. Your leaving us in the dark.
-
Xcudame replied to the thread C body axle.The C-Body rear assembly is 63.4" from flange to flange while the E-Body is 60.7". Also on the C-Body, the perches where the leaf...
-
Got to have some way to attach the cap. The screw either came loose or broke.
-
The loose part in the center of the pictured wheel is the back plate that secures the center cap to the wheel. The cap is fitted from...
-
Xcudame replied to the thread No oil cap valve covers.Some of the early small blocks had this kind of PCV valve. You pulled the whole thing off to add oil. Is that what your valve covers have?
-
