Exhaust heat shields

[moparmaniac10]

I bought a set of exhaust heat shields and M wondering how they bolt up. Any pics would be great.

 

[burdar]

One fastener screws into the shock x-member. There are two or three screws that attach to the inside of the frame. Finally, the rear of the shield gets sandwiched between the trunk floor and the muffler hanger.

 

[moparleo]

That's Purdy.

 

[moparmaniac10]

Thank you. that helps me a ton. I had to order the exhaust hangers so I can finish it and get it off to the exhaust shop in 2 weeks.

 

[bgmac77]

One fastener screws into the shock x-member. There are two or three screws that attach to the inside of the frame. Finally, the rear of the shield gets sandwiched between the trunk floor and the muffler hanger.

View attachment 32411

Do you know the screw sizes that attach to the frame. All these companies sell the bolt kit but only include 3 per side it's my understanding their is 5 bolts per shield as you mentioned 2 goto the frame. I threw all my bolts and shields away during the frame off and I'm trying to put the bolt sizes together to install the new shields...any help is much appreciated thank you!!

 

[moparlee]

You might want to start a new thread. Burdar hasn't been on here in 11 years.

 

[bgmac77]

You might want to start a new thread. Burdar hasn't been on here in 11 years.

Thank you. I'm not sure how to do that yet but once I do I will. Thank you!!

 

[Xcudame]

BCMAC77, see attached photo! Good luck now that you know what you need.

 

[bgmac77]

BCMAC77, see attached photo! Good luck now that you know what you need.

View attachment 139105

MY man!! Thank you!!