gran coupe john
Well-Known Member
Really need a how to. Been almost 8 years since I tore it apart. Any help would be appreciated.
Thank You
Thank You
Anyone have a step by step to put front end on 71 barracuda
- Thread starter gran coupe john
- Start date
rklein71
Well-Known Member
One part at a time.
Mr Cuda
Well-Known Member
Headlight assemblies mounted loosely, so they can be centered after grill is installed.
Then bumper, and last, valance.
I would also pre fit valance with everything off as the mount points might need some tweaking. Hard to do on your back when you can't see, and are reaching in. With everything off, you can reach right in on the valance.
Don't forget the semi flat black paint first.
Then bumper, and last, valance.
I would also pre fit valance with everything off as the mount points might need some tweaking. Hard to do on your back when you can't see, and are reaching in. With everything off, you can reach right in on the valance.
Don't forget the semi flat black paint first.
Xcudame
Well-Known Member
Yes, you need black out paint on the front radiator yoke. To describe how to spray it on, some poor sap stood in a pit under the car and sprayed it up at a 45° angle! I sure hope he was paid well or his co-workers at least bought him a beer now and then after work!
Similar threads
