Anyone ever built a custom radiator cover support for ther Challenger ? Thinking about doing something like this to mine . Anyone have pics of theirs ? Thanks
I have a miss when I get on it from 1st to 2nd and 3rd to 4th . Timming was good and set the Elderbrock Carb with a vacuum gauge . All was good . Ran a compression check
No 1 120
3 118
5 122
The rest of the cylinders were
148 to 150 range Could this be my miss ?
Thanks
I have never worked with a z bar . I installed the motor and transmission and wondering .... Do I loosen the Zbar from the frame and pulled it back and then push it on the ball of the bellhousing or can I take the ball off the bellhousing put it in the Zbar then screw it back on the bellhousing...
Getting ready to change my clutch out on my 360 . Any recommendations before I buy ? Im not planning on drag racing it... just to cruise . The motor has a slight cam with headers nothing major .
Thanks
I am pulling my 360 out of my Challenger . Ive pulled the trans. and when I did the motor drop down a bit . When that happened water began running down at the back of the motor on the left side. I have already drained the radiator .Theres no water on top of the manifold , so I dont know where...
Anyone know of a company that sells a complete pulley set for the small blocks ? Im going to add some bling to my motor this winter . March has them but their over my budget .
Thanks
I have a 73 Challenger with a 360 in it . Where does the overflow tube run to ? Is there suppose to be a overflow tank or does it just run out the bottom of the car ? I do not have a tank .
Thanks
Anyone ever had sporadic oil pressure gauged problems ? I have a 73 Challenger 360 sometimes the oil pressure does not show on the gauge and other times its fine shows good oil pressure . I check the oil in on the dip stick and shows full . So what could it be ?
Thanks
Hey guys I have fender turn signals on my 73 Challenger . We painted the car , I took the signals off the fenders before paint . Got the car back put them back on and plug them up but would not work. I'm getting power up to the sockets but when I put blubs in I get nothing . I went a bought new...
Im thinking about buying Rocket Boosters for my Challenger . They will be 17 x 7 4.25 backspace on the front and 17 x 8 4.50 backspace on the back . What size tires should I get for the front and rear ? I have Stock suspension on it.
Thanks
Anybody ever restore their door panels ? Mine have nicks and scratches pretty deep . Just wondering if I can restore them or need to buy new ones .
Thanks