• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Search results for query: *

  1. Ctriton20

    440 OVERHEATS

    My build is close to yours and I had the same problem. If you install this Ford electric fan RNB-620-104 from Summit you will be good. This fan setup moves 2500-3000 cfm of air. I took me 3 months to work out this issue. TTI Ceremic coated headers help too. The problem with the stock fans...
  2. Ctriton20

    1973 Mecum Creamsicle Challenger

    I’m running a 8-3/4 rightnow.
  3. Ctriton20

    1973 Mecum Creamsicle Challenger

    On my 1973 Challenger, I went with the 400/512 stroker with trick flow 240 heads. It made around 580hp at the wheel on the dyno. I removed the 3.91 and installed 3.23 for drivability. Running a 3 speed trans by A&A.
  4. Ctriton20

    Horsepower lost at the wheel

    Would it be safe to say that using the horsepower to torque calculator that my dyno reading of 525 ft -lbs at 5850 rpms equals 584.8 hp at the wheel?
  5. Ctriton20

    Wilson Manifold

    That looks great! Did you notice any power gains?
  6. Ctriton20

    Horsepower lost at the wheel

    Went to the dyno today! This shop had a Mustang Dyno. Not sure why it made more torque than horsepower. The AF ran around 12.5-14. I was running 38 degrees of timing. I added new tti step headers and 3" exhaust since the last dyno. I guys at the shop think that my converter is killing the...
  7. Ctriton20

    Horsepower lost at the wheel

    Before number 6 wasn't firing. I also installed new tti headers and exhaust. (2'-1/8" step headers and 3 exhaust). Got a better tune setup. I'll let you guys know how it goes.
  8. Ctriton20

    Horsepower lost at the wheel

    I'm going in for a followup dyno Tuesday. Before number 6 wasn't
  9. Ctriton20

    Wilson Manifold

    Thanks! That's what I needed to know.
  10. Ctriton20

    Wilson Manifold

    Hey Guys! I thinking about having Wilson Manifold port my Trick Flow intake and add nitrous bungs. Have any of you guys had one done? What kind of horsepower gains did you see? Thanks
  11. Ctriton20

    Horsepower lost at the wheel

    10" 3400-3800 Stall
  12. Ctriton20

    Horsepower lost at the wheel

    I’m going to do some tuning and follow up on the same dyno.
  13. Ctriton20

    Horsepower lost at the wheel

    I posted my engine dyno sheet in our forum. It made 665hp at 5800 and 691tq at 4500. Put the car on the dyno with full trim and it only made 480hp at 5800. That's a massive lost guys! 400/512 stroker with trickflow 240 heads 10.5cr.
  14. Ctriton20

    Horsepower lost at the wheel

    Hey Guys! I want to know. How much engine horsepower is lost at the wheel on a big block mopar with a 727 trans and 3.91 gears?
  15. Ctriton20

    1973 Challenger New Paint

    Didn’t have much body work to do. Clear coat needs to be touched up a little. I will be out $5k when all is done including materials. Most shops are going to want 10k-15k these days.
  16. Ctriton20

    1973 Challenger New Paint

    Just finished paint and tires on my Challenger. I used Viper Red for the paint and for tires 245 in the front and 305 on the back.
  17. Ctriton20

    Alternator suggestions...

    I have one installed and it worked fine.
  18. Ctriton20

    Alternator suggestions...

    Check to make sure your voltage regulator is putting out 14 volts. I purchased a few stock ones that didn't. So I installed an adjustable voltage regulator and was able to set it to the correct voltage.
  19. Ctriton20

    Anyone have leaf spring relocation kit and a factory rear sway bar?

    Thanks for the infro guys. I'm needing to modify mines also.
  20. Ctriton20

    512 Stroker Build

    I used the 440 source 400/512 stroker kit. 10.5 cr/950 carb/Comp Cam solid lift roller (At .050...252 int. 263 exh. .660 lift 108.0). Trickflow 240 heads for solid lift cam. Trickflow single plane intake.
Back
Top