• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Search results for query: *

  1. C

    440 harmonic balancer looooose!

    You need to measure the crank & see if it is in spec , the damper is done , it is in very bad shape . It would depend what your plan is for the engine , you could do a 512 stroker kit with a new steel crank , rods & pistons this would allow you to use a internal balance damper instead
  2. C

    Strange Adjustable Shocks

    Not a fan of KYB , We used a lot of different adj shocks on drag set ups , not so much on cornering / street set ups Bilstein & QA1 are great , even Rancho makes great shocks .
  3. C

    Why all the hype? 4 speeds

    My Daily right now is a Diesel 5 spd .
  4. C

    1970 Challenger Convertible - New Member

    Welcome !
  5. C

    My Challenger is too loud!

    Flowbasterd are not my fav Dynomax , , Hooker Aero , are far better , often adding a resonator after the muffler will help
  6. C

    Why all the hype? 4 speeds

    More control with a manual , which is why I love them . Easy to repair too . I have owned over 100 vehicles mostly Mopar & virtually never had an Auto . I have driven tractor trailer 13 - 15 - 18 spd , Dump truck etc , Driven ice roads in tractor trailers for years . Everyone has their...
  7. C

    Why all the hype? 4 speeds

    Never learned to drive an Auto ...
  8. C

    340 Heads intake valves

    I believe they will clean up ok , I would put in hardened seat on the exhaust side .
  9. C

    Electrical issue with the indicators

    more at the lights , if the housings are not grounded properly with clean surfaces it will try to ground through other circuits
  10. C

    Electrical issue with the indicators

    Make sure your grounds are good
  11. C

    833 Transmission

    I used the grab them from the wrecking yards , you should be able to buy one reasonably used . Minor mods & they bolt right in
  12. C

    Car just stalls while driving.

    BIg Block ? fuel pump pushrod can wear down & not supply enough fuel to the carb
  13. C

    New Member from Hawaii

    Welcome !
  14. C

    70 Challenger Steering Issues

    Caster corrects the steering , most of the front end will swing easily so maybe disconnect the pitman arm from the center link & see if the steering moves ok , possible the steering box is causing an issue
  15. C

    1970 dodge Challenger

    Welcome to the site !
  16. C

    318 LA Build specs

    I would still use a cam Other than Comp or Melling , Voodoo series work extremely well in Mopar . Get a Double roller timing chain If you use the stock 318 heads I would open the port to 340/360 size the smooth flow from the larger intake ports in the manifold into the smaller head ports Lots...
  17. C

    What shocks to use with super stock springs?

    Never been a fan of KYB , if the springs are moved inboard I doubt you will need longer shocks as the shocks will be be more compressed with the lower mount inward . QA1 Rancho & Bilstein are all great shocks , definately want adjustable to control the rise tho .
  18. C

    Whats the difference please.

    68-70 used the square bore 4150/4160 mounting , these are a great intake 72-73 used the Thermoquad spread bore mount also a very good intake .
  19. C

    Moper Rescue

    Welcome to the site
  20. C

    Hi Mopar friends! New member from Half Moon Bay, California!

    Welcome to the Site , I love 4 spd cars !
Back
Top