Search results for query: *

I need a new radiator for my Cuda. It originally had a 26" radiator and now has a 20 or 22 that is going to be inadequate. Engine is a 340 that dyno'd at a conservative 460hp, so I'm going to need an efficient cooling system. I am switching to a manual trans so don't need the built in...

Long shot but you never know.... I am looking for a new or used road race or pro-touring style oil pan for a small block Mopar 318/340 application. These will have baffles and internal doors to keep the oil from moving away from the pickup while cornering. There aren't many options that I'm...

Looking for feedback from those that have the QA1 stuff on their car and used it in anger at the track. I've had every intention of running the stock K-frame torsion bars, but with heavier duty aftermarket versions. I'm going to be doing auto-x, road courses, etc and want to optimize the...

I’m converting my 73 Cuda from an automatic to manual transmission. Going from a 727 to an A833. Will I have to do anything with the driveshaft to accommodate the four speed or is the same length used in both applications?

What have you guys found to be the minimum vacuum level at idle to make the E-body OEM power brakes function correctly? In this case it is a 73 Cuda. I think there have been different boosters over the years and the one in mine is pretty large diameter. I just finished the build on the engine...

I hope to be putting the dash back in the car this fall. I'll be freshening up the standard cluster which was all working OK and try to get the clock working correctly to start with. Might convert ammeter to voltmeter. At some point in the future I'd love to have a Dakota Digital setup but it...

I'm looking at putting a Milodon road race pan on the 340 I'm building for my Cuda. It will see road course track usage so I want to make sure the oil is under control in the pan and get a higher capacity pan. Can those that have used this pan comment on whether the stock windage tray fits...

I've already replaced the top and bottom parts of the LH A-pillar and thought I could restore the narrow center section. As I get into it, there may not be enough metal left after rust removal to make rebuilding the center section viable. So I'd like to see if anyone has a section of the A...

Can the Hellcat Brembo brake calipers and rotors be retrofit onto an E-body spindle? I'm not coming up with any examples with a search. I think the front rotors are 380mm and rears are 350 so I'm aware I'll need at least 18" wheels, maybe bigger? I've come across a full set of calipers and...

Lightly used dual exhaust tips for a 70-74 Challenger. Not sure of the brand, maybe Year One, but they are very good quality. Thick materiel on the pipe and body of the tips. 2" OD on the pipe which I think is designed to slip into standard muffler. Could be modified if you have a larger...

I know they are available in the aftermarket (~$200) but am looking to see if anyone has a set of decent drip rails that fit a 73 Cuda. I really only need the front 12"-18" or so, especially on the driver side to patch mine, but will take what I can get if the price is right. Aftermarket or...

Looking for feedback on aftermarket power front window lifts, specifically from A1 Electric, or any others that may be available. Main concerns are fit, durability, and speed. Are they fixed speed or can that be adjusted? I've seen some on other brand cars that seem to go really fast, which I...

I've got a TR5 tunnel ram intake coming my way for the 340 I'm building for my 73 Cuda and am looking for suggestions, been there done thats, ideas, etc for a hood scoop to keep the motor covered. I'm not opposed to having the carbs sticking through the hood but, before I commit to just a hole I...

Found this kit in unused condition not far from me for a good bit less than the asking price at Jeg's. According to the fitment chart it should work with my stock setup (F-disk, R-drum) on my 73 Cuda. Does anyone have any experience with this vendor? I was planning on having my original...

Can someone describe what if any difference there is between the center brace that is used on a Challenger and a Barracuda? The only new parts I have been able to find are listed for Challenger and come as part of a three piece kit, front/center/rear. Makes sense that the front or rear would...

Need shifter boot and bezel for my conversion. Does not need to be perfect. Driver quality or something in need of restoration will be considered.

Has anyone fitted a big brake kit from an 2005-2014 mustang onto the front of an Ebody? Ran across a lightly used set of StopTech ST40 calipers and one piece rotors for a good price. The bolt pattern is same, but I'm not sure the rotor offset is compatible. If it's been done and can work I...

Lower control arms. $50 10x2.5" drum brake assemblies . Shoes and drums look like new, no wear. $50 Thrust rods. $25 Drum Brake Spindles $75 Upper Control arms $Free with purchase. Center steering link $50 Manual steering box $25 Parts are all in good used condition but wear parts like...

Are the steel frames that all the components in the dash bolt to, the same for Challengers and Barracudas? They seem to be but I want to verify before I purchase a replacement for my Cuda which was bent in an accident.

Has anyone integrated one of these aftermarket Nav/radio/Multi-function flat screen devices in your car? I'm curious to what you used, where it's mounted, and how it works.