Good Info moparleo, iam going to borrow a couple of rims and tires from a buddy who has a duster with the 205 and 215 tires and see what fits thank you!
thanks challenger rta and moparleo for the help looks like i will try the 205/75 r 15 to gain about 1'' or more clearance according to the chart ; the only problem i have is getting those smaller wide tires to inflate on the bead with the 7'' wide rims.......again thank you
Hi I have 15 x 7 summit fast five aluminum rims 4'' back spacing on the rear with 225 /75 r 15 tires that fit there v good,when i put them on the front they rub on the lower fender lip pretty bad; my question is can i use a
205/ 70 r 15 tire or a 215/ 70r 15 tire and get the clearance i need...
Hi if anyone can confirm the back spacing of 4'' or 4 1/8'' on these rims please let me know. Thanks moparleo i did ck tonys parts a little pricey for my use
WTB .......Hi looking for stock steel wheel for '73 cuda , 15 x7 ,back spacing is 4'' or 4 1/8'' , 4.50 bolt pattern ; driver cond., i know the shipping is going to be $$ ,but let me know what u have thanks.
Hi I have these 15" steel wheels on my '73 now i know the factory shipped with 14''; i am looking for a replacement steel rim , looks like they are 7'' wide or 7 1/4'' and the back spacing is 4'' or 4 1/8'' my question is where can i find a part number on this rim to confirm the sizes, and who...
I went with the stock 24 to 1 . I could be wrong here but from what i read the steering wheel is keyed so no adjustment, the coupler is keyed and must be aligned with the hole on steering shaft and keyed spline on the box so no adjustment; so that leaves just the tie rods for adjustment....... i...
Thanks steve I took your advice and got a new stock steering box, what a difference. Please take a look at my steering wheel pic this is how much play was in the old box ,my question since this is when the wheels are straight can i adjust the tie rods to bring my steering wheel back to center...
Thanks Hemi and Chryco .Crazy question would i be able to remove the top cover with the 3 bolts to inspect the insides? I did check the gear oil from the fill plug it looks clean and full the worm gear looked ok also. Is 2537349 a good part number for this box cant find mine must be on the side...
Hi Its been awhile but i am starting to work on my '73 with 318 manual steering and notice that when the steering wheel is straight and wheels straight there is just a little free play in the steering wheel but when i turn it to the right about 1/4 turn there is about 4'' of free play in the...
Hi I am working on a 1973 cuda 3 speed floor shifter and was greasing the front end. I was looking for a grease fitting on the clutch z bar shaft and found none. Can anyone tell me if there should be one and how often this should be greased. I rebuilt this many years ago and did not remember if...