Search results for query: *

I hope this is the last of my electrical problems. I really don't understand this one,ok it's a new forward harness I have power to everything I have 11.4 volts at the connector for the parking lights, I pull the connector apart and use the power probe to charge just the bulb and it works I put...

ok on the back of the fuse block is the bulkhead disconnect, the wire from the interior to the engine compartment run through connectors in in the bulkhead disconnect. before I do something stupid does anyone know how to remove them? should I just give a good pull? thanks

I'm putting a 70 cuda back together, I started the car and saw some smoke in the dash. I took the gauge cluster out and noticed the amp meter wire getting hot. I took the gauge apart and noticed the isolators were in bad shape replaced them hooked back up, started the car again and same thing...

I have a 70 cuda that I'm finishing up but I don't know where the extra arm on the wiper hooks up. does anyone have a picture of the wiper arms, it would be highly appreciated. thanks

I finished painting my car and started color sanding,started with 600 because of orange peal then 1500, then 3000. problem is I can still see scratches from 3000 after rubbing compound, not sure what to do, should I go to 5000 grit?

ok first my headlamp switch when i turned on the headlamps the parking and tail lights would go off.I took the switch apart and cleaned it that worked but I still don't have any dash lights come to think of it I don't think I have power to the gauges either. any help

I'm starting my 440 for the first time and I noticed oil under the car, I started it again and saw oil coming out of the dip stick tube where it goes into the block. what can I do and why is it doing that. thanks

Ok I bought a 440 to up grade my cuda from the 318, the seller said it was re built.I was taking the plugs out to hook up the exhaust and noticed thay were ac delco 7 they look new except the orange paint. my question is will they work? I can't find anything on line and summit didn't have a...

can anyone tell me what i need to measure to find out what cover i need for a big block 10.5 or 11" and is there any other differences (# of bolt holes or anything)thanks

can anyone tell me where this hose from the center carb goes

what would cause a door window to be loose in and out not up and down? winds up good and has no play when rolled up tight but as soon as you crank it down a little it has a ton of play.need help.thanks

need some instruction on installing a windshield on a 70 cuda, what thickness butal tape and any hints you can come up with. thanks for any help

I'm looking for the drip rail chrome pieces for a 1970 cuda. thanks

I need both L&R inside lock rods.

I'm looking for both L&R inside door lockrods.

I'm restoring a 70 cuda and don't know where the rear seat belts go. I know where the holes are but I don't know if the retractable part goes in the middle or on the wheel well side?anyone have a pic. thanks