Search results for query: *

I know they are available in the aftermarket (~$200) but am looking to see if anyone has a set of decent drip rails that fit a 73 Cuda. I really only need the front 12"-18" or so, especially on the driver side to patch mine, but will take what I can get if the price is right. Aftermarket or...

Looking for feedback on aftermarket power front window lifts, specifically from A1 Electric, or any others that may be available. Main concerns are fit, durability, and speed. Are they fixed speed or can that be adjusted? I've seen some on other brand cars that seem to go really fast, which I...

I've got a TR5 tunnel ram intake coming my way for the 340 I'm building for my 73 Cuda and am looking for suggestions, been there done thats, ideas, etc for a hood scoop to keep the motor covered. I'm not opposed to having the carbs sticking through the hood but, before I commit to just a hole I...

Found this kit in unused condition not far from me for a good bit less than the asking price at Jeg's. According to the fitment chart it should work with my stock setup (F-disk, R-drum) on my 73 Cuda. Does anyone have any experience with this vendor? I was planning on having my original...

Can someone describe what if any difference there is between the center brace that is used on a Challenger and a Barracuda? The only new parts I have been able to find are listed for Challenger and come as part of a three piece kit, front/center/rear. Makes sense that the front or rear would...

Need shifter boot and bezel for my conversion. Does not need to be perfect. Driver quality or something in need of restoration will be considered.

Has anyone fitted a big brake kit from an 2005-2014 mustang onto the front of an Ebody? Ran across a lightly used set of StopTech ST40 calipers and one piece rotors for a good price. The bolt pattern is same, but I'm not sure the rotor offset is compatible. If it's been done and can work I...

Lower control arms. $50 10x2.5" drum brake assemblies . Shoes and drums look like new, no wear. $50 Thrust rods. $25 Drum Brake Spindles $75 Upper Control arms $Free with purchase. Center steering link $50 Manual steering box $25 Parts are all in good used condition but wear parts like...

Are the steel frames that all the components in the dash bolt to, the same for Challengers and Barracudas? They seem to be but I want to verify before I purchase a replacement for my Cuda which was bent in an accident.

Has anyone integrated one of these aftermarket Nav/radio/Multi-function flat screen devices in your car? I'm curious to what you used, where it's mounted, and how it works.

Not sure what went wrong. Battery hasn't been holding a charge for long. Wouldn't start yesterday, put it on the charger. Went to fire it up this morning and when I turned the key it was like a rifle shot. Blew the top of the battery off, parts and liquid all over the garage because the hood...

I have what I believe to be an Accurate Exhaust system for a 70-74 big block E body. 70-74 383/440 Big Block Complete Exhaust System It is used and a little dirty but complete from manifold flanges to the chrome tips, minus the hangers and some clamps. I think they are the standard mufflers...

Does this look like a E-body pedal set? It is being represented as being for a 71-74 B or E-body. The offsets in the pedals don't look like the pics I've seen for an E body. Maybe for an A body?

I've got the standard cluster but with the clock on the RH side. The clock doesn't function correctly, the hour and minute hands never move but the second hand seems to be in a different position, so it must be moving very slowly. It is also missing the stem to set the time. I can't find any...

Kind of an unusual request. I need passenger side E-body small block header only. Current one got caught on trailer while being loaded, which bent it down at the collector. It was low to begin with, really low now. I don't really care what brand or finish. Somewhat local to SE Wisconsin and...

I've got the original disk front, drum rear setup. Goal is to be going a lot faster than they can handle when I get it on the track. Looking into the various options out there so, a few questions: Whose kit are you using? What needs to change with master cylinder or adding hydro-boost? What...

Is 13" too small for a steering wheel? I think the stock one is 15"? I found a Grant that I like the look of but 13" seemed like it might be on the small side. I've got power steering and will be getting a Stage 3 FirmFeel rebuild on the box and I will be doing some Auto-X and road course events.

I found that as I tried to get my exhaust closer to the bottom of the car, I was somewhat thwarted by it running into the E-brake cable that crosses the middle of the car near the end of the transmission. Can this be re-routed? Run the pipes between the body and the cable? I have ideas but am...

I know there were different designs throughout the years and have seen single and dual spring combos. I'm removing the Holley and mounting a new AVS2 and want to put the appropriate return spring on. The hardware store crap that is on there now is less than optimal, the pedal feel is bad and...

Anyone running a Kevco 301 pan on their smallblock with Hedmann or other "under the steering" type headers? Any fitment issues? Looks like the pan is similar in dimension to the stock pan with a more square sump section, but my headers are awful close to the stock pan so, just asking.