WTB 10 x 2.5 rear brakes for 8.75

[cuda_queer]

Looking for 10 inch brake set for my 8.75 rear end. The more hardware the better. At a minimum, backing plates needed with brake shoe spreader and parking brake lever.

Condition of backing plates is important.

 

[cuda_queer]

Been posted for a while, so let me know.
I can add any brake hardware you need besides what is shown.
Cad is not "correct" but it does protect, and shows they are clean.

http://[URL]https://www.forebodiesonly.com/forum/threads/10-×2-5-rear-backing-plates.30675/

[/URL]

From what I understand, these appear to be from early model 8.75 due to lack of wheel cylinder piston stops on backing plates. Must admit they are clean and I can remove the plating. Was really looking for the later style. Thanks for the response.

 

[Katfish]

Interesting, anyone have a pic of the "stops" ?
Never hrd of that

 

[Mr Cuda]

As it turns out, I have no other backing plates loose. Just ones on the hoof.
Those cars could be awhile before being broken apart.

 

[cuda_queer]

As it turns out, I have no other backing plates loose. Just ones on the hoof.
Those cars could be awhile before being broken apart.

Like your avatar. What year E bodies do you have pending disassembly?