11" vs 10.5" clutch and bell housing

[moparmaniac10]

Can you use the 10.5" flywheel, clutch, and pressure plate with an 11" bell housing? Will there be an issue with the starter?

 

[edison1970]

You need the flywheel with the greater number of teeth. Don't think the starter will engage with a smaller flywheel.

 

[Chryco Psycho]

I agree , the 130 tooth flywheel needs the smaller belhousing , using the 143 tooth belhousing the starter sits further away from the flywheel .
the alum belhousing is the 130 tooth & uses the 10.5 or 10.95 " clutches , Cast iron belhousings are the 143 tooth & use only the 11" clutch ,