• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

70 cuda restoration

Bob’s Cuda

Member
Joined
Oct 28, 2018
Messages
18
Reaction score
1
I’m looking for a trunk floor with trunk rails that go around axles, everything is welded
in 1 piece. I can find it at year one but only for a challenger, does anyone know if it is
made for the cuda, I ve ran into dead ends everywhere.
Thanks Bob
 

rklein71

Well-Known Member
Joined
Feb 27, 2015
Messages
1,154
Reaction score
521
Location
Amarillo Texas
I presume what you are referring to as trunk rails are the frame rails, correct?

IMG_1933.JPG
 

Bob’s Cuda

Member
Joined
Oct 28, 2018
Messages
18
Reaction score
1
Yes, year one has trunk floor frame rails and behind
rear seat pan for a challenger, but I think it is the
same as a cuda.
 

moparmike1974

Well-Known Member
Joined
Nov 12, 2018
Messages
66
Reaction score
12
I think the difference in challenger and cuda is in the rear floorboard area. Challenger is a little longer. I believe the rest is the same between the two.
 

Bob’s Cuda

Member
Joined
Oct 28, 2018
Messages
18
Reaction score
1
Thanks for the info,I think you’re right.
Year one says it’s different, but with all my
research I think it will work.
Thanks for the advise.
 

gs73rallye

Active Member
Joined
Jul 8, 2015
Messages
37
Reaction score
12
Cuda and Challenger trunks are different. Cuda gas fillers go out the back, but challenger fillers go out the side through a hole in the trunk floor.
 

Bob’s Cuda

Member
Joined
Oct 28, 2018
Messages
18
Reaction score
1
I think that’s the only difference, we are going
to move the holes. The measurements are the
same. I’m going to see if they will make one
with no gas hole. Thanx for your reply.
Bob
 

Bob’s Cuda

Member
Joined
Oct 28, 2018
Messages
18
Reaction score
1
Does anyone know the measurements between fog
lamps on a 70 cuda?
Thank You
Bob
 

Cuda416

Well-Known Member
Joined
Jun 14, 2012
Messages
134
Reaction score
69
Location
TX
I think that’s the only difference, we are going
to move the holes. The measurements are the
same. I’m going to see if they will make one
with no gas hole. Thanx for your reply.
Bob

I don't believe the fuel tube hole is punched out on these, so you might be good either way.

Also, others are right, the challenger is two inches longer in the rear foot well, other that that, they are the same.

Can't wait to see how it goes.

-=C
 
Back
Top