Adaptor for Custom Radiator and original transmission line

[wiging19]

I have a high performance Entropy radiator which has female plug holes. The original Transmission line needs a male feed. What adaptor has anyone use to make the connection between the two?

 

[Katfish]

What size, there's adapters for anything you can imagine.
Something like this?

Amazon.com: XYWHPGV Brass Refrigerant Adapter, SAE 45 Degree 5/16 Inch Flare Male Thread to 1/4 Inch NPT Female Thread, Hose Connection Hose Connector, for Air Conditioning Cooling for(ec650 8c047 f4243 cc937 fd : Automotive

Buy XYWHPGV Brass Refrigerant Adapter, SAE 45 Degree 5/16 Inch Flare Male Thread to 1/4 Inch NPT Female Thread, Hose Connection Hose Connector, for Air Conditioning Cooling for(ec650 8c047 f4243 cc937 fd: Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

a.co

 

[pschlosser]

brass fittings (male-to-male) screw into the bottom tank, and then the hydraulic cooling lines are screwed to the other end of the fitting. A plumbing supply store should have the fitting you need, if you can figure out the thread sizes.

 

[wiging19]

brass fittings (male-to-male) screw into the bottom tank, and then the hydraulic cooling lines are screwed to the other end of the fitting. A plumbing supply store should have the fitting you need, if you can figure out the thread sizes.

Thanks for the suggestion on where to go. I was thinking of a speed shot where I got adaptors for my fuel line.