Adaptor for Custom Radiator and original transmission line

[wiging19]

I have a high performance Entropy radiator which has female plug holes. The original Transmission line needs a male feed. What adaptor has anyone use to make the connection between the two?

 

[Katfish]

What size, there's adapters for anything you can imagine.
Something like this?

Amazon.com: XYWHPGV Brass Refrigerant Adapter, SAE 45 Degree 5/16 Inch Flare Male Thread to 1/4 Inch NPT Female Thread, Hose Connection Hose Connector, for Air Conditioning Cooling for(ec650 8c047 f4243 cc937 fd : Automotive

Buy XYWHPGV Brass Refrigerant Adapter, SAE 45 Degree 5/16 Inch Flare Male Thread to 1/4 Inch NPT Female Thread, Hose Connection Hose Connector, for Air Conditioning Cooling for(ec650 8c047 f4243 cc937 fd: Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

a.co

 

[pschlosser]

brass fittings (male-to-male) screw into the bottom tank, and then the hydraulic cooling lines are screwed to the other end of the fitting. A plumbing supply store should have the fitting you need, if you can figure out the thread sizes.

 

[wiging19]

brass fittings (male-to-male) screw into the bottom tank, and then the hydraulic cooling lines are screwed to the other end of the fitting. A plumbing supply store should have the fitting you need, if you can figure out the thread sizes.

Thanks for the suggestion on where to go. I was thinking of a speed shot where I got adaptors for my fuel line.

 

[wiging19]

Just got back from the hardware store the hardware store. Should be available in two days.

 

[Chryco Psycho]

1/4 pipe to 5/16 inverted flare I believe

 

[pschlosser]

Just got back from the hardware store the hardware store. Should be available in two days.

I just got back from our local hardware chain selling products from China (Home Depot) and they have this fitting, 1/4 NPT by 5/16 Flair

 

[Xcudame]

Ace Hardware! Ace is the place! Plus they're actually helpful! 9 times out of 10, I'm heading to the screw/bolt/fitting aisle for something car related.

 

[pschlosser]

Ace Hardware! Ace is the place! Plus they're actually helpful! 9 times out of 10, I'm heading to the screw/bolt/fitting aisle for something car related.

Agreed, ACE is my "goto" for most non-mainstream (made in china) fasteners, such as those double-ended studs, fender washers, and most things metric.

 

[MOPARMITCH]

Or Tractor Supply....Farmers need fittings too....