• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Edelbrock 4150 650 cfm wanted

SRKlegin

Well-Known Member
Joined
Oct 11, 2021
Messages
101
Reaction score
25
Location
Roy, UT
Looking for a rebuildable or great Edelbrock 4150 650 cfm for my 340LA. Any ideas? Money is very tight right now.
 

Steve340

Well-Known Member
Joined
Sep 19, 2016
Messages
982
Reaction score
396
Location
New Zealand
You could run a wanted advert - but watch out for scammers. I would only deal with known members.
Edelbrock carbs have been advertised here before.
Buying second hand carburettors is a gamble at best.
Have you tried Woodruff - he could have a good core.
 

SRKlegin

Well-Known Member
Joined
Oct 11, 2021
Messages
101
Reaction score
25
Location
Roy, UT
You could run a wanted advert - but watch out for scammers. I would only deal with known members.
Edelbrock carbs have been advertised here before.
Buying second hand carburettors is a gamble at best.
Have you tried Woodruff - he could have a good core.
Looking now
 

Xcudame

Well-Known Member
Joined
May 27, 2023
Messages
1,614
Reaction score
1,210
Location
Southeast Arizona
If you can't find the Edelbrock carb you're looking for, I'd definitely go with an original AVS and rebuild it.

Of course my first preference would be to grab an LD340 (or the Mopar Big block stolen concept Edelbrock Air Gap 😁) and run a nice rebuilt Thermoquad!! It's a heart racing, ear to ear grin producing sound when those secondaries open up! And usually a bark from the rear tires as well! 😀
 

Spyder

Member
Joined
Sep 9, 2024
Messages
20
Reaction score
18
Location
Far N. California
I've got a 20 year old Edelbrock AVS (I think?) sitting on the shelf that needs a rebuild I'd give ya for very fair. It was on my 440 for many years and rarely run, but after sitting that long it had leaks. Rather than rebuilding it I just stuck an AVS2 on and was happy with it.

I'm not sure the exact model but if interested, I'll go grab some pictures and info for you. I haven't looked at it in a long time and don't recall exactly what it is. And yea, I'm the new guy that no one knows here, but I promise I wouldn't rip you off. ;):lol:
 

Spyder

Member
Joined
Sep 9, 2024
Messages
20
Reaction score
18
Location
Far N. California
I've got a 20 year old Edelbrock AVS (I think?) sitting on the shelf that needs a rebuild I'd give ya for very fair. It was on my 440 for many years and rarely run, but after sitting that long it had leaks. Rather than rebuilding it I just stuck an AVS2 on and was happy with it.

I'm not sure the exact model but if interested, I'll go grab some pictures and info for you. I haven't looked at it in a long time and don't recall exactly what it is. And yea, I'm the new guy that no one knows here, but I promise I wouldn't rip you off. ;):lol:
Forgot to look at it while kicking around in the shop, but I think it's a 1406, which I think is only 600 cfm, not quite the one you're looking for. Either way, I'll be out in the shop tomorrow and will post more info if'n you're interested.
 
Back
Top