Craig J
Well-Known Member
Note: The car has a running 440 in it now, but can be removed if the buyer does not want it.
Engine: Aluminum 540, everything new except the valve covers, zero miles.
BMP 4.500 bore block
Molnar 4340 4.250 crank, 7.100 molnar rods, Diamond 4032 10.2:1 pistons, Bullet solid roller, BAM lifters, smith pushrods, all ARP hardware.
Eddie 61175 heads, Hemiguys rockers, Dual quad Eddie Pro-Flo EFI (also includes a dual quad Eddie carb intake)
Reproduction e body exhaust manifolds, Schumacher conversion mounts, billet hemi flywheel
Transmission: wide ratio Silver Sport TKX ~1500 miles on it.
Rear: B-body width S60, OE Dana 3.54 gears, eaton tru trac, 35 spline strange axles, OE drum brakes
Other: Dakota Digital, Borgeson, wilwood front brakes, Tommy Chryco Shaker, USCAR, cuda side gilles, side marker lights, tail trim, grill trim, rim blow steering wheel, etc...
Body firewall forward is all AMD other than the OE flat hood converted for the shaker. Included but not installed are both AMD full 1/4's. Rear 1/4's are not installed yet
I do not have the skill or place to do the paint work... time to let someone else dump time & money into this thing...
$55K. not looking for trades.
Located in West Palm Beach Florida.
craig.d.jorgensen@outlook.com if you want more info.
Engine: Aluminum 540, everything new except the valve covers, zero miles.
BMP 4.500 bore block
Molnar 4340 4.250 crank, 7.100 molnar rods, Diamond 4032 10.2:1 pistons, Bullet solid roller, BAM lifters, smith pushrods, all ARP hardware.
Eddie 61175 heads, Hemiguys rockers, Dual quad Eddie Pro-Flo EFI (also includes a dual quad Eddie carb intake)
Reproduction e body exhaust manifolds, Schumacher conversion mounts, billet hemi flywheel
Transmission: wide ratio Silver Sport TKX ~1500 miles on it.
Rear: B-body width S60, OE Dana 3.54 gears, eaton tru trac, 35 spline strange axles, OE drum brakes
Other: Dakota Digital, Borgeson, wilwood front brakes, Tommy Chryco Shaker, USCAR, cuda side gilles, side marker lights, tail trim, grill trim, rim blow steering wheel, etc...
Body firewall forward is all AMD other than the OE flat hood converted for the shaker. Included but not installed are both AMD full 1/4's. Rear 1/4's are not installed yet
I do not have the skill or place to do the paint work... time to let someone else dump time & money into this thing...
$55K. not looking for trades.
Located in West Palm Beach Florida.
craig.d.jorgensen@outlook.com if you want more info.
