• Welcome to For E Bodies Only !

    We are a community of Plymouth Cuda and Dodge Challenger owners. Join now! Its Free!

Floor pan replacement measurement?

dschem

Member
Joined
Jul 30, 2016
Messages
20
Reaction score
0
Hello,

I am in the process of replacing the front and rear floor pans on my 74 barracuda. I have a 1 piece front and the 2 piece rear sections.

It seems that with the front piece in place it sags at the back of the hump slightly so I am wondering if there is a measurement from the roof down to the back of the hump on the front piece that I can use when I attach the rear pieces. I do not want to attach the rear pieces until I have the back of the hump on the front section at the correct height.

Thanks

Dave
 

rklein71

Well-Known Member
Joined
Feb 27, 2015
Messages
1,035
Reaction score
459
Location
Amarillo Texas
I measure right at 38 (3 inches added for the length of the tape measure) inches in my 71 with an original front floor pan. Rod

IMG_4337.JPG


IMG_4338.JPG


IMG_4339.JPG
 
Top