Challenger340!
Member
So just installed Fitech EFI with the command Center pump the pump is return-less but it has a vent line that directions say to run back to tank. Wanting to fire it up I put a vent hose out to the front bumper ran it for 20 min noticed a drip of gas coming out every 3-4 seconds.
My question can I use the the original steel vent line that runs to the engine compartment that originally went to the charcoal can,i know there’s a check valve in the end of the line to prevent liquid from entering the can, but I could chop that out.
If this setup won’t work have you any other ideas?
Thanks for any input. Btw 72 challenger 340
My question can I use the the original steel vent line that runs to the engine compartment that originally went to the charcoal can,i know there’s a check valve in the end of the line to prevent liquid from entering the can, but I could chop that out.
If this setup won’t work have you any other ideas?
Thanks for any input. Btw 72 challenger 340