FOUND Need front seat belt Bolts

[ProSport]

I have a '70 Challenger hardtop, I have 2 seat belt bolts, need 2 more.
Let me know what the length of yours is, I may need 4 but most likely 2.

 

[Grady Cain]

We need to know which part of the seat belts you need bolt(s) for - the retractor or the buckle side. The retractor side uses a C10 bolt while the buckle side uses a C12. see chart for sizing...

 

[ProSport]

The 2 I have are C11.

 

[Grady Cain]

So you need 2 C10 bolts and 2 C12 bolts. Not sure what level of condition you are looking for - there are plenty of originals available on Ebay. I know I have extras but not sure what sizes I have. I will try to look in my shop tomorrow to see what I've got...

 

[ProSport]

Ok thanks let me know. I'm really not building a 100% restoration or anything like that so I don't know if it really matters, I don't even know what type of seat belt I'm gonna run yet. Leaning towards the Corbeau 3 point retractable belt though.

Does anyone have a photo of where the shoulder harness bolts to the roof area without a headliner? My car has the headliner installed so I'm afraid to cut in the wrong place, also need to know the prober way to cut it without causing a tear in the headliner.

 

[Grady Cain]

Not the greatest photos but you should be able to get the idea. Just feel around with your finger for the hole which is very close to the coat hook. Once you locate it, use a sharp razor blade to cut a small "x" through the headliner over the hole opening. If your car never had front shoulder harnesses and you want to put stock ones in place, you will need the brackets that hold the shoulder harness up along the roof just above the windows.

 

[Grady Cain]

FEBO member Claudia just posted some seat belt bolts for sale.

 

[ProSport]

Thanks I sent them a message

 

[ProSport]

Thanks for those photos also!

 

[Claudia]

I have sold a couple of the seat belts bolts but I still have a few left if interested.

 

[ProSport]

I'm all set now thanks!